ROBINSON HELICOPTER R44
Olathe, KS — July 2, 2014
Event Information
| Date | July 2, 2014 |
| Event Type | ACC |
| NTSB Number | CEN14CA338 |
| Event ID | 20140703X85332 |
| Location | Olathe, KS |
| Country | USA |
| Coordinates | 38.85389, -94.73528 |
| Airport | JOHNSON COUNTY EXECUTIVE |
| Highest Injury | NONE |
Aircraft
| Make | ROBINSON HELICOPTER |
| Model | R44 |
| Category | HELI |
| FAR Part | 091 |
| Aircraft Damage | SUBS |
Conditions
| Light Condition | DAYL |
| Weather | VMC |
Injuries
| Fatal | 0 |
| Serious | 0 |
| Minor | 0 |
| None | 2 |
| Total Injured | 0 |
Event Location
Probable Cause
The pilot's failure to follow the manufacturer's engine shutdown procedure.
Full Narrative
The pilot reported he landed at the airport without incident. During engine shutdown, he applied rotor brake to slow the main rotor blades. When the pilot released the brake, he heard a bang and felt an impact to the aircraft on the rear left side. He reapplied the main rotor brake intermittently until the blades stopped. The pilot exited the aircraft and noticed a tail boom strike occurred. He stated he input aft cyclic during landing to accommodate landing slightly downhill and did not place the controls in neutral during shutdown. According to the manufacture's shutdown procedures, the cyclic and pedals should be in the neutral position.
About This NTSB Record
This aviation event was investigated by the National Transportation Safety Board (NTSB). NTSB investigates all U.S. civil aviation accidents to determine probable cause and issue safety recommendations to prevent future accidents.