Technical Service Bulletins
Search 172,063 manufacturer communications covering 879 vehicle makes from 1955 to 2025.
Showing 198 bulletins for VAN HOOL
SB1791
Dec 7, 2021
263000 FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL
Product Improvement: To retrofit with Adaptive Cruise Control (ACC) and Collision Mitigation System (CMS) Van Hool has released Adaptive Cruise Control (ACC) in combination with Collision Mitigation System (CMS) as an option. This document
SB2039A
Nov 19, 2021
103210 POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:VALVES/VALVE BODY
Service Information - Introduction of new 4/2 solenoid valve in compressed-air circuit Van Hool has switched over into production to a new type of 4/2 solenoid valve in the compressed-air system. As the previous Knorr-Bremse (Bosch) soleno
SB1997
May 7, 2021
062200 ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN
Optimization of 3-speed fan clutch control. FIELD CHANGE PROGRAM: Van Hool has optimized the multiplex program regarding to the 3-speed fan clutch control. This optimization will give a solution for the overheating issues at certain operati
SB1961
Mar 3, 2021
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Service Information Bulletin: What to do in case of prolonged vehicle standstill. This service bulletin provides an overview of works to be performed during prolonged vehicle standstill.
SB1954
Feb 25, 2021
061560 ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PRESSURE/TEMPERATURE SENSOR
Service Information Bulletin: To replace speed and temperature sensors on traction motor. This service bulletin gives step-by-step instructions on how to replace the speed and temperature sensors of the Siemens PEM 1DB2024-0NA06 traction mo
SB1939
Feb 24, 2021
050000 PARKING BRAKE
Field Change Program: Optimization of multiplex program Van Hool has optimized the multiplex program. Owners and operators are requested to load the new multiplex program according to the step-by-step instructions given in this service bul
SB1924
Jan 11, 2021
030000 BRAKES (PWS)
Field Change Program: Optimization of multiplex program Van Hool has optimized the multiplex program regarding to the foot brake functionally of the retarder. Owners and operators are requested to load the new multiplex program according t
WP1250A
Dec 22, 2020
185000 VEHICLE SPEED CONTROL:CRUISE CONTROL
Work Procedure: To retrofit with Collision Mitigation System (CMS) and Adaptive Cruise Control (ACC). ADDENDUM TO SERVICE BULLETIN SB1789: This work procedure should be read together with service bulletin SB1789.
SB1900A
Dec 15, 2020
062400 ENGINE AND ENGINE COOLING:COOLING SYSTEM:PUMP
Product Improvement Bulletin: As from the following units onwards (CX35, MY2020:49983; CX45, MY2020: 81456; TX45, MY2020: 41718), vehicles are factory fitted with a FT6000SC circulating pump instead of the previously installed FT5000 circul
WP1151
Dec 10, 2020
117000 ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
Work Procedure: To load new program and parameters into digital instrument panel (MVP) (Informative)
SB1789
Dec 9, 2020
185000 VEHICLE SPEED CONTROL:CRUISE CONTROL
Product Improvement Service Bulletin: To retrofit with Adaptive Cruise Control (ACC) and Collision Mitigation System (CMS) Van Hool has released ACC in combination with CMS as an option
WP1178
Dec 3, 2020
117100 ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER
Work Procedure: To set odometer reading (Informative)
SB1900
Nov 17, 2020
062400 ENGINE AND ENGINE COOLING:COOLING SYSTEM:PUMP
Product Improvement Bulletin: As from the following units onwards (CX35, MY2020: 49983; CX45, MY2020: 81456; TX45, MY2020: 41718), vehicles are factory fitted with a FT6000SC circulating pump instead of the previously installed FT5000 circu
WP1120A
Oct 19, 2020
100000 POWER TRAIN
Work Procedure: To reinforce structure of trailing axle module (fix on fail) This procedure has been released to assist in successfully reinforce the connection between the diagonals and horizontal tube in the trailing axle module.
WP1319
Sep 24, 2020
063000 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
Work Procedure: Optimization of DEF installation (corrective) This procedure has been released to assist in successfully optimizing the Diesel Exhaust Fluid (DEF) installation.
WP1327
Sep 23, 2020
060000 ENGINE AND ENGINE COOLING
Work Procedure: To change fan drive hydraulic fluid (informative) The purpose of this procedure is to provide information about how to change the hydraulic fluid of the fan drive.
WP1322
Sep 22, 2020
110000 ELECTRICAL SYSTEM
Work Procedure: To install capacitor between fuse box alternator output cables and starting motor ground terminal (corrective) This procedure has been released to successfully install a capacitor between the fuse box of the alternator outp
WP1328
Sep 21, 2020
062000 ENGINE AND ENGINE COOLING:COOLING SYSTEM
Work Procedure: To charge parameters into controller of hydraulic fan-drive (informative) The purpose of this procedure is to provide information on how to charge parameters into controller of hydraulic fan-drive.
WP1315
Sep 15, 2020
060000 ENGINE AND ENGINE COOLING
Work Procedure: This procedure has been released to assist successfully optimizing the engine air intake installation between the turbocharger and the charge-air-cooler (corrective).
WP1321
Sep 15, 2020
042100 SERVICE BRAKES, AIR:SUPPLY:COMPRESSOR
Work Procedure: To remove air line between compressor and governor (corrective) This procedure has been released to assist in successfully removing the air line which runs between the compressor and the governor.
WP1325
Sep 15, 2020
110000 ELECTRICAL SYSTEM
Work Procedure: To replace circuit breakers in junction boxes EKM and EKV (corrective) This procedure has been released to assist in replacing circuit breakers in junction boxes EKM and EKV.
SB1863
Sep 11, 2020
030000 BRAKES (PWS)
Van Hool has optimized the multiplex program regarding to the foot brake functionally of the retarder. Owners and operators are requested to load the new multiplex program according to the step-by-step instructions given in this service bul
MIC-VANH-090820
Sep 8, 2020
350000 EQUIPMENT
Van Hool N.V. and ABC Companies did not release any new service bulletins during the month of August 2020.
SB1847
Sep 3, 2020
110000 ELECTRICAL SYSTEM
Van Hool has received some complaints about the temperature control in the drivera??s cab. Investigation has shown that these vehicles have left the factory with a drivera??s cab climate control unit outlet temperature sensor that is not co
SB1826
Jun 2, 2020
060000 ENGINE AND ENGINE COOLING
Service Information Bulletin: The purpose of this bulletin is to inform you about how to align the cooling fan drive. This should be performed every time components of the fan drive have been removed, and when evidence of contact damage h