Technical Service Bulletins
Search 172,063 manufacturer communications covering 879 vehicle makes from 1955 to 2025.
Showing 407 bulletins for TRIUMPH
SMT-SB-491
Apr 1, 2013
042600 SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS
We have identified that the brake hose clip fitted to the front mudguard on the above models must be replaced. Dealers are requested to remove and replace the clip and, repair/replace the front mudguard if it has been damaged by the brake h
SMT-TN-143
Apr 1, 2013
350000 EQUIPMENT
A new gear position sensor and fly lead have been introduced to the above models from engine number 596481. If replacing the gear position sensor or fly lead from engine number 596481, refer to the EPC for the part numbers. If replacing th
SMT-TN-144
Apr 1, 2013
060000 ENGINE AND ENGINE COOLING
If a customer reports excessive top-end engine noise on an engine fitted to the above models up to VIN 602960, the dealer is requested to replace the cylinder head with a new cylinder head and camshaft drive chain tensioner following the p
SMT-TN-145
Apr 1, 2013
060000 ENGINE AND ENGINE COOLING
If a Tiger Explorer customer reports excessive top-end engine noise (a ticking and or knocking noise) on an engine fitted to the above models up to VIN 602960, the dealer is requested to arrange the return of the motorcycle to Triumph Motor
SMT-SB-484
Mar 1, 2013
063000 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
We have identified a need to replace the exhaust butterfly valve cables on the above models. Dealers are requested to remove and replace the exhaust butterfly valve cables.
SMT-SB-485
Mar 1, 2013
062300 ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS
We have identified that the two bolts securing the coolant hose T-piece to the lower crankcase are not tightened to specification. Dealers are requested to re-torque the bolts as instructed below.
SMT-SB-486
Mar 1, 2013
100000 POWER TRAIN
We have identified that the punch mark used to align the transmission linkage has in some instances been incorrectly positioned on the above models. Dealers are requested to check, and if necessary, adjust the gear change pedal position.
SMT-TN-142
Mar 1, 2013
350000 EQUIPMENT
The drive chain vertical movement setting has changed to 20 - 30 mm for the above model. This change affects all bikes from the start of production. The Tiger 800XC setting has not changed and remains as described in the service manual and
SMT-TN-141
Feb 1, 2013
061500 ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION
Recommended Lubricant Specifications
SMT-TN-139
Jan 1, 2013
063110 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
A new sliding selector shaft and detent assembly has been introduced on the above models from engine number 563847. The new shaft is secured into the crankcase with E-clips and is not retrofittable. When ordering replacement parts, always r
SMT-SB 473 1 Dec
Dec 1, 2012
203000 WHEELS:LUGS/NUTS/BOLTS/STUDS
Service Bulletin 473 describes the procedure to apply a thread compound to the side stand pivot bolt and domed nut.
SMT-SB 476 1 Dec
Dec 1, 2012
160000 STRUCTURE
Service Bulletin 476 describes the procedure to remove instrument fascia and fit two upper fixings to secure the cockpit front panel to its subframe.
SMT-SB 437 1 Nov
Nov 1, 2012
350000 EQUIPMENT
Service Bulletin 437 describes procedure to remove and replace the panniers.
SMT-SB 451 1 Nov
Nov 1, 2012
118000 ELECTRICAL SYSTEM:SOFTWARE
Service Bulletin 451 provides instructions to update audio software.
SMT-SB 472 1 Nov
Nov 1, 2012
060000 ENGINE AND ENGINE COOLING
Service Bulletin 472 describes procedure to fit or replace the O-ring for the oil-strainer.
SMT-SB 475 1 Nov
Nov 1, 2012
060000 ENGINE (PWS)
Service Bulletin 475 provides instructions for dealers to check the fixings for the camshaft cover.
SMT-TN 138 1 Nov
Nov 1, 2012
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Technical service bulletin addressing service instructions, some of which apply to all models. Instructions relate to fuel pump plates, swinging arm boot clip fixings, thermostat changes, engine protection bar fixings, correction to approve
TN-111
Oct 19, 2009
113100 ELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID
TRIUMPH MOTORCYCLES: WORKSHOP TECHNICIANS AND RELEVANT STAFF ARE AWARE OF CONTENTS FOR REPAIR. THIS EDITION-CYLINDER HEAD; CARB ADAPTER AND EFI ADAPTER; HEADSTOCK BEARINGS; LICENSE PLATE BRACKET; FRONT BRAKE DISC; HEADLIGHT RIM; STARTER S
SB-401
Apr 1, 2009
103300 POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)
TRIUMPH MOTORCYCLE: SOME MOTORCYCLES MAY HAVE AN INTERMITTENT PROBLEM WITH THE GEAR INDICATOR DISPLAY ON THE INSTRUMENTS. DEALERS ARE REQUESTED TO REPLACE THE GEAR POSITION SENSOR. *PE
TSB-108
Apr 1, 2009
062100 ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY
TRIUMPH MOTORCYCLES: MODELS DAYTONA 675, ROCKET III, ROCKET II CLASSIC, ROCKET III TOURING, SPEED TRIPLE 1050, SPRINT 1050, SPRINT 1050 ABS, TIGER 1050, TIGER 1050 ABS, STREET TRIPLE, STREET TRIPLE R AND DAYTONA 955 FROM 2002.
TN-107
Mar 12, 2009
022000 SUSPENSION:REAR
TRIUMPH MOTORCYCLE: REAR SUSPENSION LINKAGE. IN ORDER TO BETTER GUARANTEE THE CONTINUED SMOOTH ACTION OF THE REAR SUSPENSION AT HIGHER ODOMETER READINGS, WE ARE NOW INCORPORATING A REQUIREMENT TO REMOVE DROP AND DRAG LINKS IN ORDER INSPEC
SB-399
Dec 8, 2008
021600 SUSPENSION:FRONT:WHEEL BEARING
TRIUMPH MOTORCYCLE: THE RIGHT HAND REAR WHEEL BEARING MAY BE INSUFFICIENTLY GREASED ON A SMALL NUMBER OF SPRINT ST 1050S. *PE UPDATED 10/01/08. *PE
SB-398
Dec 1, 2008
030000 SERVICE BRAKES, HYDRAULIC
TRIUMPH MOTORCYCLE: REPLACEMENT OF FRONT CALIPER BOLTS AND BRACKET. A NUMBER OF THRUXTON MOTORCYCLES MAY HAVE A PROBLEM WITH THE FRONT BRAKE CALIPER BOLTS. THE INSTALLED BOLTS MAY BE TOO SHORT, REDUCING THREAD ENGAGEMENT OF THE BOLTS INTO
TB-105
Dec 1, 2008
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
TRIUMPH MOTORCYCLE: APPENDICES A AND B FOR DAYTONA 675 FROM VIN 377510. TORQUE FIGURES, OIL PUMP INSPECTION; AND SERVICE MANUAL SUPPLEMENT. NO MODEL YEARS LISTED. *PE
TB-104
Nov 1, 2008
034510 SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER
TRIUMPH MOTORCYCLE: HEADERS DISCOLOURATION, CAMSHAFT COVER, HORN, BRAKE CALIPER SLIDING PIN GREASING, CAMSHAFT CAP LADDER BOLTS TIGHTENING SEQUENCE, OIL PRESSURE RELIEF VALVE, NEW COOLANT, WARNING LABELS, ENGINE CONTROL MODULE (ECM) BRACKE