Technical Service Bulletins
Search 172,063 manufacturer communications covering 879 vehicle makes from 1955 to 2025.
Showing 3,523 bulletins for PORSCHE
122-H9A7N-09
Aug 18, 2016
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
"IF THERE IS A LOSS OF POWER OR IF THE FOLLOWING FAULT CODES ARE STORED IN THE FAULT MEMORY, THE WASTEGATE MUST BE CHECKED FOR SMOOTH OPERATION AND CORROSION: ? P0133 (OXYGEN SENSOR UPSTREAM OF CATALYTIC CONVERTER, BANK 1) ? P0153 (OXYGEN
122-M9M8G-09
Aug 18, 2016
350000 EQUIPMENT
The vacuum line can slip off the control box as a result of component tolerances of the clamp. In the event of a customer complaint, check that the vacuum line is fitted securely on the control box at the left and right. ? If the vacuum l
122-N4J6S-09
Aug 18, 2016
100000 POWER TRAIN
Oil leak/leak on PDK transmission close to the connection point between the intermediate housing and cover. Insufficient cross-cut made at the flange and as a result, the sealant has not bonded sufficiently.
122-P3H6B-09
Aug 18, 2016
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
Mechanical blockage of the adjustment mechanism due to accumulation of ice and dirt. Check adjustment mechanism on both turbochargers and clean it if necessary.
122-U5W3W-09
Aug 18, 2016
030000 BRAKES (PWS)
If the front brake caliper needs to be replaced, new part numbers are available. This should reduce the number of spare parts variants. Once existing inventory has been used up, order only the new parts numbers.
122-N6L6C-09
Aug 17, 2016
070000 FUEL SYSTEM, GASOLINE
The O-ring on the fuel injector can be damaged by the clamping ring. The clamping ring has been re-designed. When working on the fuel injector, e.g. in the event of a leak, in addition to replacing the O-ring, the clamping ringmust also be
122-T8X6Q-09
Aug 11, 2016
062000 ENGINE AND ENGINE COOLING:COOLING SYSTEM
"THERE MAY BE A DIFFERENCE BETWEEN THE ACTUAL COOLANT TEMPERATURE AND THE PREDICTED TEMPERATURE DUE TO INCORRECT POSITIONING OF THEMAP-CONTROLLED THERMOSTAT DURING THE WARM-UP PHASE ON THE AFFECTED VEHICLES. THE ERROR MESSAGE ""FAULT COOL
122-P2Z3Z-09
Aug 9, 2016
220000 SEATS
Supersessions to the seat adjustment motor on the spare parts requirements for the front power seat frame.
122-C4N9A-09
Aug 8, 2016
103000 POWER TRAIN:AUTOMATIC TRANSMISSION
"THE UNWARRANTED ERROR MESSAGE ""GEARBOX FAULT"" CAN APPEAR SPORADICALLY IN THE INSTRUMENT CLUSTER ON THE AFFECTED VEHICLES BECAUSE THE DIAGNOSTIC FUNCTION FOR THE HYDRAULIC VALVES IN THE PDK TRANSMISSION IS TOO SENSITIVE. IF THIS HAPPENS,
122-F3A8L-09
Aug 8, 2016
110000 ELECTRICAL SYSTEM
This campaign includes steps where control unit(s) in the vehicle will be programmed with the PIWIS Tester. The vehicle voltage must be maintained between 13.5 volts and 14.5 volts during this programming. Failure to maintain this voltage
122-R4W5T-09
Aug 8, 2016
118000 ELECTRICAL SYSTEM:SOFTWARE
Due to a software error in the DME control unit, a rough-running engine can occur sporadically during the warm-up phase on the affected vehicles. If this happens, the Check Engine light will be activated.
122-X4D4A-09
Aug 8, 2016
100000 POWER TRAIN
The unwarranted errormessages "Hybrid system fault" and "Reduced engine power" can appear sporadically in the instrument cluster on the affected vehicles under certain driving conditions because the diagnostic function for the hybrid decoup
122-G3T4J-09
Aug 5, 2016
200000 WHEELS
Some of the underbody protection in the rear left wheel housing was not applied according to specifications on the affected vehicles due to a programming error at a production station. As a result, this area can become corroded over the s
122-U5R2H-09
Aug 5, 2016
103000 POWER TRAIN:AUTOMATIC TRANSMISSION
"THERE IS A POSSIBILITY THAT MOISTURE CAN GET INTO THE LID OF THE REAR FUSE BOX ON THE AFFECTED VEHICLES UNDER CERTAIN ENVIRONMENTAL INFLUENCES. THIS CAN CAUSE MALFUNCTIONS IN THE PDK TRANSMISSION OVER THE SERVICE LIFE OF THE VEHICLE. THE E
122-D4G7E-09
Aug 4, 2016
100000 POWER TRAIN
There is a possibility that a gear synchronization component in the PDK transmission does not comply with the specified dimensions on the affected vehicles. This can result in noises after a gear change while driving. Continued use of the
122-U8L3A-09
Aug 4, 2016
105300 POWER TRAIN:DRIVELINE:DRIVESHAFT
There is a possibility that the bolt for the internal axial fixing device for the rear drive shafts on the affected vehicles can become corroded over the service life of the vehicle and break as a result. Given that the drive shafts are su
122-S5V2E-09
Aug 3, 2016
106000 POWER TRAIN:AXLE ASSEMBLY
"THIS CAMPAIGN INCLUDES STEPS WHERE CONTROL UNIT(S) IN THE VEHICLE WILL BE PROGRAMMED WITH THE PIWIS TESTER. THE VEHICLE VOLTAGE MUST BE MAINTAINED BETWEEN 13.5 VOLTS AND 14.5 VOLTS DURING THIS PROGRAMMING. FAILURE TO MAINTAIN THIS VOLTAGE
122-J6W3M-08
Jul 27, 2016
060000 ENGINE (PWS)
"ENGINE-OIL LEVEL AND ENGINE OIL CONSUMPTION. ? INFORMATION FOR MEASURING THE ENGINE-OIL LEVEL ? ALWAYSMEASURE THE ENGINE-OIL LEVEL BEFORE USING THE VEHICLE ON A RACE TRACK ? INFORMATION ON ENGINE OIL CONSUMPTION ? MEASURE THE OIL CONSU
122-F5Q8K-07
Jul 26, 2016
110000 ELECTRICAL SYSTEM
Resubmitting at request of Mr. Bernard Hardgrave. Instructions on how to check the cable routing in the front center console area and rework it if necessary in the event that the speedometer needle in the instrument cluster is shaking.
122-T3B3N-08
Jul 26, 2016
103100 POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
ASSESSMENT OF THE STATUS OF DISPLAY ERRORS IN THE PCM OPERATOR CONTROL UNIT AND IN THE INSTRUMENT CLUSTER.
122-P4R7K-08
Jul 20, 2016
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
THE APPROVAL AND SUPPORT MANAGEMENT SYSTEM WAS CREATED TO OFFER ASSISTANCE TO THE DEALER ORGANIZATION WITH NEW AND COMPLEX TECHNICAL ISSUES BY UTILIZING THE SUPPORT SPECIALISTS WITHIN PORSCHE R&D. AS A RESULT, THIS PROCESS HAS REDUCED VEHIC
122-D3P8T-08
Jul 8, 2016
132000 VISIBILITY:GLASS, SIDE/REAR
"DEFECTS AND DAMAGE TO PAINTED SURFACES AND GLASS CAN BE DIFFICULT TO PHOTOGRAPH. WHEN TRYING TO PHOTOGRAPH BODY PAINT AND GLASS TO DOCUMENT A DEFECT OR DAMAGE, THE REFLECTIONS CAN HIDE THE ACTUAL DEFECT. A BEST PRACTICE TO FOLLOW FOR THIS
122-X9D7D-08
Jul 8, 2016
150000 SEAT BELTS
"IN THE PARTS CATALOGUE FOR THE 918 SPYDER, THE LOCATIONS FOR USING THE SCREWS FOR SECURING THE SEAT BELT MOUNT AND BELT REEL WERE DISPLAYED INCORRECTLY. ONCE REMOVED, THE SCREWS USED TO SECURE THE SEAT BELT MOUNT AND BELT REEL MUST NOT