Vehicle Safety
Recalls Search 320,000+ NHTSA safety recalls Complaints 2.1M+ consumer safety complaints TSBs 4.7M technical service bulletins VIN Lookup Decode any vehicle VIN instantly OBD Codes 12,000+ diagnostic trouble codes Fuel Economy EPA MPG data for all vehicles Safety Ratings 11,700+ NHTSA crash test ratings Investigations 5,300+ NHTSA defect investigations Statistics Recall trends & safety analysis
Consumer Safety
Product Safety 9,700+ CPSC product recalls Food Safety 28,600+ FDA food recalls Pet Safety 1.3M FDA animal adverse events Drug Safety 17,500+ FDA drug recalls Device Safety 38,400+ FDA device recalls Workplace Safety 102,900+ OSHA injury reports Brand History Cross-category recall lookup by company
Infrastructure
Bridge Safety 624,000 bridge inspections Aviation Safety 30,000+ NTSB aviation events Dam Safety 92,600 dam safety records Water Safety 433,000+ public water systems Railroad Safety 438,000+ rail crossings Pipeline Safety 8,800+ pipeline incidents State Safety Dashboards Safety grades for all 50 U.S. states ZIP Safety Report Check any 5-digit ZIP across 9 datasets
Public Health
Nursing Homes 14,700 CMS rated facilities Environmental 80,000+ hazardous sites & releases
Blog

NHTSA Campaign 06V409000

PARKING BRAKE:CONVENTIONAL:AIR

Issued by MITSUBISHI FUSO TRUCK OF AMERICA, INC. · Reported Oct 26, 2006 · 218 vehicles affected

What's wrong

ON CERTAIN TRUCKS, EQUIPPED WITH A FULL AIR BRAKE SYSTEM, THERE MAY BE 3 POSSIBLE DEFECTS RELATED TO THE PARKING BRAKE CHAMBER PORTION OF THE AIR BRAKE CHAMBER ASSEMBLY. THEY ARE AS FOLLOWS: (1) DUE TO IMPROPER INSTALLATION OF THE PARKING BRAKE CHAMBER END CAP DURING ASSEMBLY, WATER MAY ENTER THE PARKING BRAKE CHAMBER, CAUSING CORROSION OF THE POWER SPRING, LEADING TO POSSIBLE SPRING FAILURE. IN THE WORST CASE, RESULTANT DAMAGE COULD CAUSE THE PARKING BRAKE TO ENGAGE WHILE THE PARKING BRAKE LEVER IS IN THE RELEASED (OFF) POSITION. (2) DUE TO IMPROPER END CAP ATTACHING SCREW DIMENSIONS, WATER MAY ENTER THE PARKING BRAKE CHAMBER, CAUSING CORROSION OF THE POWER SPRING, LEADING TO POSSIBLE SPRING FAILURE. IN THE WORST CASE, RESULTANT DAMAGE COULD CAUSE THE PARKING BRAKE TO ENGAGE WHILE THE PARKING BRAKE LEVER IS IN THE RELEASED (OFF) POSITION. (3) DUE TO IMPROPER TIGHTENING OF THE END CAP ATTACHING SCREW DURING ASSEMBLY, WATER MAY ENTER INTO THE PARKING BRAKE CHAMBER, CAUSING CORROSION OF THE POWER SPRING, LEADING TO POSSIBLE SPRING FAILURE. IN THE WORST CASE, RESULTANT DAMAGE COULD CAUSE THE PARKING BRAKE TO ENGAGE WHILE THE PARKING BRAKE LEVER IS IN THE RELEASED (OFF) POSITION.

Consequence

CONTINUED OPERATION IN THIS CONDITION COULD CAUSE CORROSION OF THE POWER SPRING IN THE PARKING BRAKE CHAMBER, LEADING TO POSSIBLE SPRING FAILURE. IN THE WORST CASE, RESULTANT DAMAGE COULD CAUSE THE PARKING BRAKE TO ENGAGE WHILE THE PARKING BRAKE LEVER IS IN THE RELEASED (OFF) POSITION AND THE VEHICLE COULD CRASH WITHOUT WARNING.

Remedy

DEALERS WILL FOR ITEM (1) ABOVE, INSPECT THE PARKING BRAKE CHAMBER. THE END CAP WILL BE REPLACED WITH A MODIFIED PART. IF CORROSION IS FOUND INSIDE OF THE CHAMBER, OR ON THE POWER SPRING, THE PARKING BRAKE CHAMBER WILL BE REPLACED. FOR ITEMS 2 AND 3, THE DEALER WILL CHECK THE MANUFACTURER IDENTIFICATION MARK ON PARKING BRAKE CHAMBER. IF MGM IS STAMPED ON THE CHAMBER, IT WILL BE INSPECTED AND THEN ADHESIVE WILL BE APPLIED TO THE END CAP ATTACHING SCREW ON THESE UNITS. IF CORROSION IS FOUND INSIDE OF THE BRAKE CHAMBER OR ON THE POWER SPRING, THE PARKING BRAKE CHAMBER WILL BE REPLACED. THE RECALL BEGAN ON NOVEMBER 9, 2006. OWNERS MAY CONTACT MITSUBISHI FUSO AT 1-856-467-4500.

Vehicles affected by this recall

Make Model Year Units
MITSUBISHI FUSO FM657 2001 218
MITSUBISHI FUSO FM657 2002 218
MITSUBISHI FUSO FM657 2003 218
MITSUBISHI FUSO FM657 2004 218

Source: NHTSA Campaign 06V409000 on nhtsa.gov. To check the current repair status for a specific vehicle, use our free VIN decoder.