OBD Code P2600
Coolant Pump Control Circuit/Open
| Code | P2600 |
| Description | Coolant Pump Control Circuit/Open |
| Possible Causes | Faulty electric water pump|Wiring issue |
| Symptoms | Overheating risk|Cooling failure |
| System | Air Metering |
What Does P2600 Mean?
Coolant Pump Control Circuit/Open. This diagnostic trouble code (DTC) is stored when the vehicle's onboard computer detects an issue with the air metering.
Code Breakdown
P = Powertrain code
2 = Manufacturer-specific
How to Fix P2600
Follow these diagnostic steps to identify and resolve the issue. Always start with the simplest checks before moving to more involved repairs.
- Check coolant level in the reservoir and radiator (when cold). Top off if low.
- Inspect for coolant leaks at hoses, water pump, radiator, and heater core connections.
- Test the thermostat — if the engine takes too long to warm up or overheats, replace it.
- Check the coolant temperature sensor connector and wiring. Test sensor resistance at known temperatures.
- Verify the cooling fan operates when the engine reaches operating temperature.
- Flush the cooling system if the coolant is old, discolored, or contaminated.
- Clear codes and monitor coolant temperature during a test drive.
Note: These are general diagnostic guidelines. Some vehicles may have model-specific procedures. Always consult your vehicle's service manual for exact specifications and torque values. If you are not comfortable performing these steps, visit a qualified mechanic.
Frequently Asked Questions
Is P2600 serious?
Yes — P2600 is considered a high-severity code. You should have it diagnosed and repaired as soon as possible. Driving with this code active may cause further damage to your vehicle or pose a safety risk.
Can I clear P2600 myself?
You can clear any OBD-II code with a code scanner or by disconnecting the battery for 15-30 minutes. However, clearing the code without fixing the underlying problem will cause it to return — usually within one or two drive cycles. If the code triggered the check engine light, the light will come back on. Fix the root cause first, then clear the code.
How much does it cost to fix P2600?
Repair costs vary widely depending on the root cause. Some fixes are free (like tightening a gas cap) while others can cost several hundred dollars (like replacing a catalytic converter or oxygen sensor). A proper diagnosis with a professional scan tool — not just reading the code — is the first step to getting an accurate repair estimate. Many auto parts stores offer free code reading, but a thorough diagnosis usually requires a mechanic.