OBD Code P0966
Pressure Control Solenoid B Control Circuit Low
| Code | P0966 |
| Description | Pressure Control Solenoid B Control Circuit Low |
| System | Transmission |
What Does P0966 Mean?
Pressure Control Solenoid B Control Circuit Low. This diagnostic trouble code (DTC) is stored when the vehicle's onboard computer detects an issue with the transmission.
Code Breakdown
P = Powertrain code
0 = Generic (SAE standard)
How to Fix P0966
Follow these diagnostic steps to identify and resolve the issue. Always start with the simplest checks before moving to more involved repairs.
- Identify which pressure system is affected (fuel, oil, boost, A/C, transmission).
- Check the pressure sensor connector and wiring.
- Test the pressure sensor with a multimeter — compare to spec.
- Verify actual system pressure with a mechanical gauge.
- Check the pressure control solenoid or valve for proper operation.
- Replace the faulty sensor or solenoid.
- Clear codes and verify pressure readings match expected values.
Note: These are general diagnostic guidelines. Some vehicles may have model-specific procedures. Always consult your vehicle's service manual for exact specifications and torque values. If you are not comfortable performing these steps, visit a qualified mechanic.
Frequently Asked Questions
Is P0966 serious?
Yes — P0966 is considered a high-severity code. You should have it diagnosed and repaired as soon as possible. Driving with this code active may cause further damage to your vehicle or pose a safety risk.
Can I clear P0966 myself?
You can clear any OBD-II code with a code scanner or by disconnecting the battery for 15-30 minutes. However, clearing the code without fixing the underlying problem will cause it to return — usually within one or two drive cycles. If the code triggered the check engine light, the light will come back on. Fix the root cause first, then clear the code.
How much does it cost to fix P0966?
Repair costs vary widely depending on the root cause. Some fixes are free (like tightening a gas cap) while others can cost several hundred dollars (like replacing a catalytic converter or oxygen sensor). A proper diagnosis with a professional scan tool — not just reading the code — is the first step to getting an accurate repair estimate. Many auto parts stores offer free code reading, but a thorough diagnosis usually requires a mechanic.