OBD Code P0810

Clutch Position Control Error

CodeP0810
DescriptionClutch Position Control Error
Possible CausesFaulty automated clutch actuator|Low fluid
SymptomsAutomated manual transmission shift issues
SystemTransmission

What Does P0810 Mean?

Clutch Position Control Error. This diagnostic trouble code (DTC) is stored when the vehicle's onboard computer detects an issue with the transmission.

Code Breakdown

P = Powertrain code

0 = Generic (SAE standard)

How to Fix P0810

Follow these diagnostic steps to identify and resolve the issue. Always start with the simplest checks before moving to more involved repairs.

  1. Check the clutch pedal position sensor (if equipped) and adjust if necessary.
  2. Inspect the clutch hydraulic system for leaks (master and slave cylinder).
  3. Check clutch fluid level in the reservoir.
  4. If the clutch slips under load, the clutch disc is likely worn and needs replacement.
  5. Inspect the clutch release bearing for noise or play.
  6. Clear codes and test clutch engagement in all gears.

Note: These are general diagnostic guidelines. Some vehicles may have model-specific procedures. Always consult your vehicle's service manual for exact specifications and torque values. If you are not comfortable performing these steps, visit a qualified mechanic.

Frequently Asked Questions

Is P0810 serious?

Yes — P0810 is considered a high-severity code. You should have it diagnosed and repaired as soon as possible. Driving with this code active may cause further damage to your vehicle or pose a safety risk.

Can I clear P0810 myself?

You can clear any OBD-II code with a code scanner or by disconnecting the battery for 15-30 minutes. However, clearing the code without fixing the underlying problem will cause it to return — usually within one or two drive cycles. If the code triggered the check engine light, the light will come back on. Fix the root cause first, then clear the code.

How much does it cost to fix P0810?

Repair costs vary widely depending on the root cause. Some fixes are free (like tightening a gas cap) while others can cost several hundred dollars (like replacing a catalytic converter or oxygen sensor). A proper diagnosis with a professional scan tool — not just reading the code — is the first step to getting an accurate repair estimate. Many auto parts stores offer free code reading, but a thorough diagnosis usually requires a mechanic.

View All OBD Codes