OBD Code C063C
Brake Pressure Sensor H Range/Performance
| Code | C063C |
| Description | Brake Pressure Sensor H Range/Performance |
| System | Chassis |
What Does C063C Mean?
Brake Pressure Sensor H Range/Performance. This diagnostic trouble code (DTC) is stored when the vehicle's onboard computer detects an issue with the chassis.
Code Breakdown
C = Chassis code
0 = Generic (SAE standard)
How to Fix C063C
Follow these diagnostic steps to identify and resolve the issue. Always start with the simplest checks before moving to more involved repairs.
- Check brake fluid level in the master cylinder reservoir — top off if low.
- Inspect brake pads and rotors for wear.
- Look for brake fluid leaks at calipers, wheel cylinders, brake lines, and master cylinder.
- Check the brake light switch for proper operation and adjustment.
- Inspect ABS sensor wiring if the code involves the ABS system.
- Bleed the brake system if air has entered the lines.
- Clear codes and test brake feel and stopping power.
Note: These are general diagnostic guidelines. Some vehicles may have model-specific procedures. Always consult your vehicle's service manual for exact specifications and torque values. If you are not comfortable performing these steps, visit a qualified mechanic.
Frequently Asked Questions
Is C063C serious?
Yes — C063C is considered a high-severity code. You should have it diagnosed and repaired as soon as possible. Driving with this code active may cause further damage to your vehicle or pose a safety risk.
Can I clear C063C myself?
You can clear any OBD-II code with a code scanner or by disconnecting the battery for 15-30 minutes. However, clearing the code without fixing the underlying problem will cause it to return — usually within one or two drive cycles. If the code triggered the check engine light, the light will come back on. Fix the root cause first, then clear the code.
How much does it cost to fix C063C?
Repair costs vary widely depending on the root cause. Some fixes are free (like tightening a gas cap) while others can cost several hundred dollars (like replacing a catalytic converter or oxygen sensor). A proper diagnosis with a professional scan tool — not just reading the code — is the first step to getting an accurate repair estimate. Many auto parts stores offer free code reading, but a thorough diagnosis usually requires a mechanic.