OBD Code B0101
Electronic Frontal Sensor 2 Performance
| Code | B0101 |
| Description | Electronic Frontal Sensor 2 Performance |
| Possible Causes | Degraded electronic crash sensor 2 |
| Symptoms | Reduced frontal crash detection |
| System | Body |
What Does B0101 Mean?
Electronic Frontal Sensor 2 Performance. This diagnostic trouble code (DTC) is stored when the vehicle's onboard computer detects an issue with the body.
Code Breakdown
B = Body code
0 = Generic (SAE standard)
How to Fix B0101
Follow these diagnostic steps to identify and resolve the issue. Always start with the simplest checks before moving to more involved repairs.
- Warning: Disconnect the battery before inspecting crash sensors.
- Locate the crash sensor indicated by the code (typically in the bumper, doors, or B-pillars).
- Inspect the sensor connector for corrosion or water damage.
- Check the wiring from the sensor to the airbag control module.
- If the vehicle was in a previous collision, the sensor may have been damaged and needs replacement.
- Replace the crash sensor and clear codes.
Note: These are general diagnostic guidelines. Some vehicles may have model-specific procedures. Always consult your vehicle's service manual for exact specifications and torque values. If you are not comfortable performing these steps, visit a qualified mechanic.
Frequently Asked Questions
Is B0101 serious?
Yes — B0101 is considered a critical-severity code. You should have it diagnosed and repaired as soon as possible. Driving with this code active may cause further damage to your vehicle or pose a safety risk.
Can I clear B0101 myself?
You can clear any OBD-II code with a code scanner or by disconnecting the battery for 15-30 minutes. However, clearing the code without fixing the underlying problem will cause it to return — usually within one or two drive cycles. If the code triggered the check engine light, the light will come back on. Fix the root cause first, then clear the code.
How much does it cost to fix B0101?
Repair costs vary widely depending on the root cause. Some fixes are free (like tightening a gas cap) while others can cost several hundred dollars (like replacing a catalytic converter or oxygen sensor). A proper diagnosis with a professional scan tool — not just reading the code — is the first step to getting an accurate repair estimate. Many auto parts stores offer free code reading, but a thorough diagnosis usually requires a mechanic.