2021 VAN HOOL AG300

1 recalls — 0 complaints — 18 TSBs

21V385000 May 25, 2021
FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL
Defect Description
Van Hool N.V. (Van Hool) is recalling certain 2018-2021 CX35, TDX25, 2018-2019 CX45, TX45, 2021 AG300, and 2018 TD925 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Consequence
A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy
Dealers will inspect the rail threads, and replace the rail as necessary, free of charge. Owner notification letters were mailed on July 30, 2021. Owners may contact Van Hool customer service at 1-877-427-7278 or 1-407-656-7977. Van Hool's number for this recall is P1489.
681 vehicles affected
Manufacturer: Van Hool N.V.

No complaints found for this vehicle.

Technical Service Bulletins — 2021 VAN HOOL AG300

18 manufacturer communications from 11 unique bulletins. TSBs describe known problems and recommended fixes from the manufacturer.

Most Affected Components

ComponentBulletins
356000 EQUIPMENT ADAPTIVE/MOBILITY2
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL2
162300 STRUCTURE:BODY:DOOR2
162000 STRUCTURE:BODY2
042100 SERVICE BRAKES, AIR:SUPPLY:COMPRESSOR1
350000 EQUIPMENT1
061400 ENGINE AND ENGINE COOLING:ENGINE:SOLENOID/ACTUATOR1
100000 POWER TRAIN1
SB1564 Feb 7, 2024
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
an Hool feels very strongly about quality and constantly focuses on product improvement. This is why we would like to ask you to provide us with the correct information as quickly as possible when filing a warranty request. A fully docu
SB2372 Jan 8, 2024
133000 VISIBILITY:POWER WINDOW DEVICES AND CONTROLS
This service bulletin provides you with information about the location of emergency side window decals so that the vehicle meets the National Highway Traffic Safety Administrationa??s (NHTSA) Federal Motor Vehicle Safety Standards (FMVSS)
SB2401 Nov 8, 2023
170000 LATCHES/LOCKS/LINKAGES
Van Hool has received a letter from Ventura, manufacturer of door systems, stating that they have recently received complaints on a regular basis about the door panel not being secured to the lower door shaft lever. A situation that can i
SB2401 Nov 8, 2023
162300 STRUCTURE:BODY:DOOR
Van Hool has received a letter from Ventura, manufacturer of door systems, stating that they have recently received complaints on a regular basis about the door panel not being secured to the lower door shaft lever. A situation that can i
SB2401 Nov 8, 2023
162000 STRUCTURE:BODY
Van Hool has received a letter from Ventura, manufacturer of door systems, stating that they have recently received complaints on a regular basis about the door panel not being secured to the lower door shaft lever. A situation that can i
SB2386 Nov 8, 2023
162300 STRUCTURE:BODY:DOOR
Van Hool has received a letter from Ventura, manufacturer of door systems, stating that they have recently received complaints on a regular basis about the door panel not being secured to the lower door shaft lever. A situation that can
SB2386 Nov 8, 2023
162000 STRUCTURE:BODY
Van Hool has received a letter from Ventura, manufacturer of door systems, stating that they have recently received complaints on a regular basis about the door panel not being secured to the lower door shaft lever. A situation that can
SB2386 Nov 8, 2023
160000 STRUCTURE
Van Hool has received a letter from Ventura, manufacturer of door systems, stating that they have recently received complaints on a regular basis about the door panel not being secured to the lower door shaft lever. A situation that can
SB2255 Jan 3, 2023
353000 EQUIPMENT:ELECTRICAL
Service Information: In its production process, Bock, manufacturer of refrigerant compressors, has switched to a new type of motor protection switch for the electric motor of the refrigerant compressor. As the MP10 motor protection switch (
SB1709 Aug 31, 2022
200000 WHEELS
Product Improvement: ALL VEHICLES WITH LIGHT-ALLOY WHEELS - Introduction of wheel-end monitoring system (WEM). Van Hool has released a wheel-end monitoring system (WEM) which can be installed on all vehicles equipped with light-alloy wheels
SB1856 Mar 24, 2022
100000 POWER TRAIN
Service Information - Maintenance operations related to refrigerant compressor oil This service information bulletin is a reminder/update about refrigerant compressor oil maintenance. To ensure a reliable system, it is important to perform
SB2039A Nov 19, 2021
103210 POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:VALVES/VALVE BODY
Service Information - Introduction of new 4/2 solenoid valve in compressed-air circuit Van Hool has switched over into production to a new type of 4/2 solenoid valve in the compressed-air system. As the previous Knorr-Bremse (Bosch) soleno
SB2039 Aug 16, 2021
061400 ENGINE AND ENGINE COOLING:ENGINE:SOLENOID/ACTUATOR
SERVICE INFORMATION BULLETIN: Van Hool has switched over into production to a new type of 4/2 solenoid valve in the compressed-air system. As the previous Knorr-Bremse (Bosch) solenoid valve (VH11102170) is no longer made available as spare
SB2039 Aug 16, 2021
356000 EQUIPMENT ADAPTIVE/MOBILITY
SERVICE INFORMATION BULLETIN: Van Hool has switched over into production to a new type of 4/2 solenoid valve in the compressed-air system. As the previous Knorr-Bremse (Bosch) solenoid valve (VH11102170) is no longer made available as spare
SB2039 Aug 16, 2021
350000 EQUIPMENT
SERVICE INFORMATION BULLETIN: Van Hool has switched over into production to a new type of 4/2 solenoid valve in the compressed-air system. As the previous Knorr-Bremse (Bosch) solenoid valve (VH11102170) is no longer made available as spare
SB1961 Mar 3, 2021
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Service Information Bulletin: What to do in case of prolonged vehicle standstill. This service bulletin provides an overview of works to be performed during prolonged vehicle standstill.
WP1321 Sep 15, 2020
042100 SERVICE BRAKES, AIR:SUPPLY:COMPRESSOR
Work Procedure: To remove air line between compressor and governor (corrective) This procedure has been released to assist in successfully removing the air line which runs between the compressor and the governor.
WP1321 Sep 15, 2020
356000 EQUIPMENT ADAPTIVE/MOBILITY
Work Procedure: To remove air line between compressor and governor (corrective) This procedure has been released to assist in successfully removing the air line which runs between the compressor and the governor.

VAN HOOL AG300 — All Years Overview

Complete safety history for the VAN HOOL AG300 across all model years (2002–2021).

8 Total Recalls
0 Total Complaints
0 Investigations
0 Reported Crashes
0 Reported Fires
0 Reported Deaths

VAN HOOL AG300 — Year by Year

Compare recalls and complaints across model years. Click any year to see full details.

Year Recalls Complaints
2021 (current) 1 0
2009 2 0 View
2007 1 0 View
2006 1 0 View
2004 1 0 View
2003 1 0 View
2002 1 0 View

Other VAN HOOL Models

Model Recalls Complaints
A300K 0 0 View
A300K HYB 0 0 View
A300L 0 0 View
A330 0 0 View
A330FC 0 0 View
A508 0 0 View
AU138 0 0 View
BUS 0 0 View