2016 TRIUMPH SPEED TRIPLE

My motorcycle has what I call a "double pull' front brake problem. When the brake lever for the front brake is pulled, I get a significant difference in lever pull. On the first pull the lever comes close to the handle bar. If I release the lever and pull it a second time, the lever pulls to a norma... l reach. I would add the brakes engage/bite much better and what would be expected for a high performance brake system from Brembo on the second lever pull. Having to pump the brakes is a safety concern to both the rider and those in traffic. I have taken the motorcycle to my local Triumph dealer while it was under warranty. They were not able to fix the problem. I also reached out to Triumph North America and was told to take it to the dealer. I believe the bike was in the shop on two occasions but I only have paperwork for one of them. The brake fluid is at a good level and has been serviced/bleed three times with the problem instantly returning. No leaks can be found on the brake system. No warning lights on the motorcycle. The problem started around 1,000 miles on the motorcycle. I purchased the motorcycle new in August 2018 as a brand new 2016 model year left over. The manufactures warranty ran out in August 2020. I have been hesitant to aggressively pursue the problem as it seems Triumph has not found a resolution to fix the problem. There seems to be a common problem with this for many people with this motorcycle/brake system. Many people with this problem have taken the motorcycle in to the dealers and had brake pistons/seals replaced and still no resolution. Please see attached online forum thread describing the problem and inability to resolve the issue: https://www.triumphrat.net/threads/16-speed-triple-front-brake-issue-brembo.953404/Read more

This is a fairly well known issue for this year Triumphs, as well as other Makes/years, fitted with this type of Brembo brakes. The brakes have an inconsistent pressure issue during operation. The first pull of the brake is soft and "spongey" and takes multiple pulls to build pressure. Full bleeding... of brake system, replacement of pads, etc. does not resolve the issue. this is obviously a huge safety concern as it does not allow the rider a clear and consistent braking operation, which can cause them to over/under apply the amount of necessary braking and pose a large risk to themselves as well as others on the road.Read more