1993 MCI 102A3
1 recalls — 0 complaints — 1 TSBs
94V020000 Feb 4, 1994
SERVICE BRAKES, AIR
Defect Description
THE BRAKE ROD TO BRAKE ARM ATTACHING NUT AND BOLT ARE UNDERTORQUED AND MAY LOOSEN AND FALL OFF CAUSING SEPARATION OF THE ROD AND ARM.
Consequence
SEPARATION OF THE BRAKE ROD AND THE BRAKE ARM RESULTS IN THE TOTAL LOSS OF THE SERVICE BRAKES WHICH MAY RESULT IN AN ACCIDENT.
Remedy
MCI WILL SUPPLY 1/2" UNF "STOVER" LOCKNUT TO CUSTOMERS. THIS LOCKNUT SHOULD BE INSTALLED IMMEDIATELY AND TORQUED TO 40 LB/FT (54 NM). A FASTENER WILL ALSO BE PROVIDED TO THE CUSTOMER ALONG WITH THE INSTALLATION PROCEDURES.
No complaints found for this vehicle.
Technical Service Bulletins — 1993 MCI 102A3
1 manufacturer communications from 1 unique bulletins. TSBs describe known problems and recommended fixes from the manufacturer.
Most Affected Components
| Component | Bulletins |
|---|---|
| 980000 UNKNOWN OR OTHER | 1 |
SB-357
Apr 25, 2011
980000 UNKNOWN OR OTHER
MOTOR COACH INDUDSTRIES: INFORMATION ON REPLACING THE COOLANT PUMP THAT MAY HAVE A PROBLEM. *RM
NHTSA Safety Investigations — MCI 102A3
Investigations opened by NHTSA into potential safety defects. These are separate from recalls and may or may not result in a recall.
EA12007
Opened: Sep 13, 2012 — Closed: Dec 3, 2015
MCI Drive Shaft Safety Loop Failures
In the fall of 2011, network contacts made ODI aware of four (4) incidents of drive shaft failure on the subject buses involving a loss of vehicle control.Two of the incidents were relatively low speed non-crash events; and two resulted in motor coach rollovers.All four events showed signs of a comm... Read more
MCI 102A3 — All Years Overview
Complete safety history for the MCI 102A3 across all model years (1992–1998).
4
Total Recalls
0
Total Complaints
1
Investigations
0
Reported Crashes
0
Reported Fires
0
Reported Deaths