2009 HINO NV8J
6 recalls, 0 complaints - 88 TSBs
12V555000 Dec 3, 2012
ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES
Defect Description
Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to... Read more
Consequence
If the B+ circuit shorts to ground, it may lead to a fire.
Remedy
Hino will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 17, 2013. Owners may contact Hino at 1-248-699-9390.
10V156000 Apr 16, 2010
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
Defect Description
HINO IS RECALLING CERTAIN TRUCKS WITH VERTICAL EXHAUST PIPES. CERTAIN BOLTS ATTACHING THE EXHAUST SYSTEM TO THE TRUCK MAY NOT HAVE BEEN PROPERLY TIGHTENED DURING THE MANUFACTURING PROCESS. THE BOLTS COULD FAIL ALLOWING THE EXHAUST SYSTEM TO SEPARATE FROM THE TRUCK.
Consequence
THE EXHAUST SYSTEM COULD FALL ONTO THE ROADWAY AND BE STRUCK BY A FOLLOWING VEHICLE RESULTING IN A CRASH.
Remedy
HINO WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 9, 2010. OWNERS MAY CONTACT HINO AT 248-699-9330.
10V157000 Apr 16, 2010
POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT
Defect Description
HINO IS RECALLING CERTAIN MODEL YEAR 2009-2010 NV8J TRUCKS. THE U-JOINT ATTACHMENT BOLTS MAY NOT HAVE BEEN PROPERLY TIGHTENED DURING THE MANUFACTURING PROCESS.
Consequence
IF THE BOLTS WERE TO LOOSEN IT COULD CAUSE A VIBRATION IN THE DRIVELINE. IF THIS VIBRATION WERE IGNORED, THE U-JOINT ATTACHMENT BOLTS COULD SHEAR AND A PORTION OF THE PROPELLER SHAFT COULD SEPARATE FROM THE VEHICLE, THUS FALLING ONTO THE SURFACE OF THE ROADWAY AND BE STRUCK BY A VEHICLE RESULTING I... Read more
Remedy
HINO WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 9, 2010. OWNERS MAY CONTACT HINO AT 248-699-9330.
10V154000 Apr 15, 2010
ENGINE AND ENGINE COOLING
Defect Description
HINO IS RECALLING CERTAIN MODEL YEAR 2008-2010 NV8J TRUCKS EQUIPPED WITH ALLISON 3000 RDS AUTOMATIC TRANSMISSION. THE DRIVE COUPLER BOLTS MAY NOT HAVE BEEN PROPERLY TIGHTENED AT THE FACTORY DUE TO THE INCORRECT TOOL POSSIBLY BEING USED DURING THE MANUFACTURING PROCESS.
Consequence
IF THE DRIVE COUPLER BOLTS WERE TO LOOSEN IT COULD CAUSE A VIBRATION IN THE DRIVELINE. IF THIS VIBRATION WERE IGNORED, THE DRIVE COUPLER BOLTS COULD SHEAR AND THE COUPLING BETWEEN THE ENGINE AND TORQUE CONVERTER WOULD NOT TRANSMIT POWER. THIS ULTIMATELY COULD RESULT IN A CRASH.
Remedy
HINO WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE VEHICLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 9, 2010. OWNERS MAY CONTACT HINO AT 1-248-699-9330.
08V667000 Dec 18, 2008
SUSPENSION:REAR
Defect Description
HINO IS RECALLING 130 MY 2008-2009 ND8J, NE8J, NJ8J, AND NV8J CONVENTIONAL TRUCKS. THE REAR AXLE U-BOLTS WERE NOT PROPERLY TIGHTENED. THE LOWER SPRING SEAT MAY NOT CONTACT THE AXLE HOUSING PROPERLY, PRODUCING A GAP ON THE FRONT OR REAR SIDE OF THE AXLE HOUSING.
Consequence
THIS GAP COULD ALLOW THE U-BOLTS TO LOOSEN AND/OR CAUSE THE LOWER SPRING SEAT TO CRACK. THE AXLE COULD BECOME MISALIGNED AND/OR SEPARATED FROM THE MOUNTINGS INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL INSPECT THE REAR AIR SUSPENSION LOWER SPRING SEAT FOR A GAP BETWEEN THE REAR AXLE AND LOWER SPRING SEAT. THE U-BOLTS WILL BE TIGHTENED TO THE SPECIFIED TORQUE. THE RECALL BEGAN ON JANUARY 19, 2009. OWNERS MAY CONTACT HINO AT 1-248-699-9330.
08V471000 Sep 18, 2008
POWER TRAIN:DRIVELINE
Defect Description
HINO IS RECALLING 1,195 MY 2007-2009 NV8J TRUCKS. DURING THE MANUFACTURING PROCESS, THE PROPELLER SHAFT BOLTS MAY NOT HAVE BEEN PROPERLY TIGHTENED DURING THE MANUFACTURING PROCESS.
Consequence
IF THE BOLTS WERE TO LOOSEN, IT COULD CAUSE A VIBRATION IN THE DRIVELINE. IF THIS VIBRATION WERE IGNORED, THE PROPELLER SHAFT COULD SEPARATE FROM THE MATING FLANGE. THIS COULD POTENTIALLY RESULT IN DAMAGE TO PROPERTY AND/OR RESULT IN A CRASH.
Remedy
DEALERS WILL REPLACE THE PROPELLER SHAFT BOLTS. THE RECALL BEGAN ON OCTOBER 14, 2008. OWNERS MAY CONTACT HINO AT 1-248-699-9300.
No complaints found for this vehicle.
Technical Service Bulletins, 2009 HINO NV8J
88 manufacturer communications from 60 unique bulletins. TSBs describe known problems and recommended fixes from the manufacturer.
Most Affected Components
| Component | Bulletins |
|---|---|
| 355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL | 13 |
| 060000 ENGINE (PWS) | 10 |
| 350000 EQUIPMENT | 8 |
| 070000 FUEL SYSTEM, GASOLINE | 6 |
| 061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER | 5 |
| 090000 FUEL SYSTEM, OTHER | 4 |
| 356000 EQUIPMENT ADAPTIVE/MOBILITY | 4 |
| 092200 FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS | 3 |
167-T1612-12
Oct 19, 2016
060000 ENGINE (PWS)
TT-16-013 The procedure for installing the rocker shaft bolts into the cam housing has been updated. It is recommended to lightly lubricate the threads and flange of the bolts with clean engine oil before installing them. The torque specifi
167-B0502-12
Sep 28, 2016
110000 ELECTRICAL SYSTEM
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B0502-12
Sep 28, 2016
190000 TIRES
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B0502-12
Sep 28, 2016
350000 EQUIPMENT
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B1625-12
Aug 5, 2016
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-16-021 CORRECTION OF WORKSHOP MANUAL FOR HINO600 SERIES Correction of Electrical Wiring Diagram
167-B1621-12
Apr 18, 2016
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-16-010 Correction of the inspection of the DPR filter.
167-P1602-12
Mar 22, 2016
060000 ENGINE (PWS)
13-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified
167-P1602-12
Mar 22, 2016
072100 FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
13-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified
167-T1514-12
Jun 22, 2015
162000 STRUCTURE:BODY
TT-15-016 The purpose of this publication is to communicate the standard measuring positions on the Hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
167-B1523-12
Jun 2, 2015
060000 ENGINE AND ENGINE COOLING
SB-15-026 A subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a servic
167-B1312-12
Apr 13, 2015
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-13-009 This bulletin is to inform dealers and workshops of proper paint codes for all Hino models. ALL MODELS
167-B1521-12
Mar 17, 2015
020000 SUSPENSION
SB-15-022 In the rare event that a subject vehicle equipped with the 23k Comfort Ride air suspension experiences a premature main leaf failure, a 23k HD Comfort Ride air suspension may be installed with PRIOR APPROVAL from HMM QA.
167-B1516-12
Mar 6, 2015
063200 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
SB-15-017 New parts are available to prevent repeat exhaust manifold stud failures on the J05 engine. This bulletin provides instructions for an exhaust manifold attachment modification at the #1 and #4 cylinder locations. Modifications to
167-B1514-12
Feb 12, 2015
100000 POWER TRAIN
SB-15-015 Information of Troubleshooting Procedure for Engine Lacked Power during the DPR Automatic Regeneration
167-B1504-12
Jan 9, 2015
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-15-003 CORRECTION OF WORKSHOP MANUAL FOR HINO 2015MY (REVISION OF TROUBLESHOOTING PROCEDURE FOR THE DTC P0421)
167-B1503-12
Jan 9, 2015
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-15-002 CORRECTION OF WORKSHOP MANUAL FOR 2013 - 2015MY (REVISION OF TROUBLESHOOTING PROCEDURE FOR THE DTC P2123)
TT-14-033
Dec 5, 2014
061500 ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION
When replacing an engine block with service part no., 11401E0380 there is potential that 2 rear oil passage plugs may be missing in the rear of the replacement engine block. In the event your replacement engine block does not have these 2 o
167-T1429-12
Dec 5, 2014
350000 EQUIPMENT
TT-14-033 When replacing an engine block with service part no., 11401E0380 there is potential that 2 rear oil passage plugs may be missing in the rear of the replacement engine block. In the event your replacement engine block does not have
167-T1429-12
Dec 5, 2014
060000 ENGINE (PWS)
TT-14-033 When replacing an engine block with service part no., 11401E0380 there is potential that 2 rear oil passage plugs may be missing in the rear of the replacement engine block. In the event your replacement engine block does not have
TT-14-033
Dec 5, 2014
350000 EQUIPMENT
When replacing an engine block with service part no., 11401E0380 there is potential that 2 rear oil passage plugs may be missing in the rear of the replacement engine block. In the event your replacement engine block does not have these 2 o
167-T1425-12
Nov 19, 2014
117000 ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
TT-14-029 A subject vehicle at 200,000 miles may exhibit a "DPR Maintenance" message displayed on the Instrument Cluster message center. The following procedure will instruct how to check the DPF and reset the displayed message.
SB-14-017
Sep 4, 2014
350000 EQUIPMENT
In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to overheating
SB-14-017
Sep 4, 2014
110000 ELECTRICAL SYSTEM
In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to overheating
SB-14-017
Sep 4, 2014
100000 POWER TRAIN
In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to overheating
167-B1404-12
Sep 4, 2014
103700 POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER
SB-14-017 In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to ov
167-T1420-12
Aug 1, 2014
350000 EQUIPMENT
TT-14-021 This procedure illustrates a worst case scenario repair procedure, the process and materials being used are the same for all repairs. Depending on the location of the repair, access may be limited in some cases. Ensure that the re
167-T1420-12
Aug 1, 2014
162800 STRUCTURE:BODY:HOOD
TT-14-021 This procedure illustrates a worst case scenario repair procedure, the process and materials being used are the same for all repairs. Depending on the location of the repair, access may be limited in some cases. Ensure that the re
167-B1415-12
Mar 28, 2014
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-14-003 The following is to inform you of the revision of the inspection procedure for the DTC?s P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to us
RCB-010-12
Feb 21, 2014
061200 ENGINE AND ENGINE COOLING:ENGINE:DIESEL
HINO: THE ENGINE CONTROL PROGRAM COULD WORK IMPROPERLY, CAUSING CHECK ENGINE LIGHT (CEL) TO TURN ON, DUE TO AGING DEGRADATION OF FUEL INJECTOR AND SOOT ACCUMULATING IN DIESEL PARTICULATE FILTER (DPF). MODEL 2008-2010 NA6J, NB6J, NC6J, ND8
RCB-010-12
Feb 21, 2014
118000 ELECTRICAL SYSTEM:SOFTWARE
HINO: THE ENGINE CONTROL PROGRAM COULD WORK IMPROPERLY, CAUSING CHECK ENGINE LIGHT (CEL) TO TURN ON, DUE TO AGING DEGRADATION OF FUEL INJECTOR AND SOOT ACCUMULATING IN DIESEL PARTICULATE FILTER (DPF). MODEL 2008-2010 NA6J, NB6J, NC6J, ND8
167-R1405-12
Feb 21, 2014
093000 FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM
RCB-010-12 When soot accumulates in the DPF (Diesel Particulate Filter) due to aging degradation of the fuel injector, the engine control program could potentially work improperly, which may cause the CEL (Check Engine Light) in the instrum
167-R1405-12
Feb 21, 2014
080000 FUEL SYSTEM, DIESEL
RCB-010-12 When soot accumulates in the DPF (Diesel Particulate Filter) due to aging degradation of the fuel injector, the engine control program could potentially work improperly, which may cause the CEL (Check Engine Light) in the instrum
167-B1307-12
Jul 23, 2013
103300 POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)
13-008 Design Change of the Idler Gear Case and Idler Gear Bolt. Abnormal load such as a stuck supply pump was applied to gear train then causing the bolt to loosen. Therefore, an enhancement to the case and bolt were carried out. The idle
167-R1301-12
May 31, 2013
060000 ENGINE (PWS)
RCB-010-12 When soot accumulates in the DPF (Diesel Particulate Filter) due to aging degradation of the fuel injector, the engine control program could potentially work improperly, which may cause the CEL (Check Engine Light) in the instrum
167-B1101-12
Aug 10, 2011
090000 FUEL SYSTEM, OTHER
SB-11-002 REQUIREMENTS OF BIOFUEL USAGE FOR 2008MY THRU 2012MY VEHICLES ALL APPLIED MODELS
167-R0902-12
Jun 16, 2011
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
RCB-003-11 This bulletin involves the inspection of the Variable Nozzle Turbine (VNT) turbocharger linkrod along with the potential replacement of the VNT turbocharger assembly.
167-B1004-12
Nov 24, 2010
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
10 - 001 Starter Assembly Mounting Nuts Torque Correction. The following is to inform you of the correction made to the Workshop Manuals
167-B1003-12
Nov 24, 2010
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
SB-10-004 This document is to inform dealers and workshops of the procedures on applying an anti-seize lubricant to the VNT Turbocharger link rod for the J05D and J08E engines.
167-B1004-12
Nov 24, 2010
110000 ELECTRICAL SYSTEM
10 - 001 Starter Assembly Mounting Nuts Torque Correction. The following is to inform you of the correction made to the Workshop Manuals
167-B1001-12
Oct 27, 2010
070000 FUEL SYSTEM, GASOLINE
SB ? 10 - 003 This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel filter.
SB-09-001
Jun 15, 2009
070000 FUEL SYSTEM, GASOLINE
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The SCV should be t
SB-09-001
Jun 15, 2009
350000 EQUIPMENT
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The SCV should be t
SB-09-001
Jun 15, 2009
356000 EQUIPMENT ADAPTIVE/MOBILITY
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The SCV should be t
167-B0903-12
Jun 15, 2009
070000 FUEL SYSTEM, GASOLINE
SB ? 09 - 001 This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The S
167-B0903-12
Jun 15, 2009
060000 ENGINE AND ENGINE COOLING
SB ? 09 - 001 This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The S
SB-09-001
Jun 15, 2009
060000 ENGINE (PWS)
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The SCV should be t
LT-0010
Jun 1, 2009
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Hino Quick Reference Guide 2005-2010 Model Years
SB-R-0030
Mar 3, 2009
090000 FUEL SYSTEM, OTHER
HINO TRUCK: ABNORMAL NOISE AND VIBRATION WITHIN THE ENGINE OCCURS DUE TO THE IMPEDED OPERATION OF THE INJECTOR NEEDLE WHICH IS CAUSED BY THE FORMATION OF DEPOSITS IN THE FUEL. *PE
SB-R-0033
Mar 3, 2009
090000 FUEL SYSTEM, OTHER
HINO TRUCK: THE DAVCO FUEL FILTER ASSEMBLY HAS BEEN IMPROVED TO PREVENT THE EFFUSION OF AIR INTO THE FUEL SYSTEM. *PE
SB-R-0034
Mar 3, 2009
061000 ENGINE AND ENGINE COOLING:ENGINE
HINO TRUCKS: ABNORMAL NOISE AND VIBRATION WITHIN THE ENGINE OCCURS DUE TO THE IMPEDED OPERATION OF THE INJECTOR NEEDLE WHICH IS CAUSED BY THE FORMATION OF DEPOSITS IN THE FUEL. *PE
SB-R-0034
Mar 3, 2009
073200 FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS
HINO TRUCKS: ABNORMAL NOISE AND VIBRATION WITHIN THE ENGINE OCCURS DUE TO THE IMPEDED OPERATION OF THE INJECTOR NEEDLE WHICH IS CAUSED BY THE FORMATION OF DEPOSITS IN THE FUEL. *PE
SL-R-0031
Mar 3, 2009
092200 FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
HINO TRUCKS: ABNORMAL NOISE AND VIBRATION WITHIN THE ENGINE OCCURS DUE TO THE IMPEDED OPERATION OF THE INJECTOR NEEDLE WHICH IS CAUSED BY THE FORMATION OF DEPOSITS IN THE FUEL. *PE
SB-R-0029
Mar 3, 2009
092200 FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
HINO TRUCKS: THE FUEL TANK BREATHER HOSE(S) HAS BEEN MODIFIED TO PREVENT WATER FROM ENTERING INTO THE FUEL TANK(S). *PE
167-R0906-12
Mar 3, 2009
080000 FUEL SYSTEM, DIESEL
R0033 This bulletin includes the instructions for replacement of Davco fuel filter assembly components
167-R0905-12
Mar 3, 2009
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
R0030 This bulletin includes the instructions for the replacement of the fuel system hoses.
167-R0905-12
Mar 3, 2009
070000 FUEL SYSTEM, GASOLINE
R0030 This bulletin includes the instructions for the replacement of the fuel system hoses.
SB-R-0030
Mar 3, 2009
092200 FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
HINO TRUCK: ABNORMAL NOISE AND VIBRATION WITHIN THE ENGINE OCCURS DUE TO THE IMPEDED OPERATION OF THE INJECTOR NEEDLE WHICH IS CAUSED BY THE FORMATION OF DEPOSITS IN THE FUEL. *PE
167-R0901-12
Mar 3, 2009
081100 FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY
R0029 This bulletin includes instructions for the replacement of the fuel tank breather hose. If the vehicle is equipped with dual fuel tanks the breather hose must be replaced on both fuel tanks.
167-R0902-12
Mar 3, 2009
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
R0034 This bulletin includes the instructions to complete the following. 1. Determine the condition of the fuel injectors by monitoring quantity value using Hino Diagnostic Explorer. 2. If the fuel injector condition is determined to be ?
167-R0904-12
Mar 3, 2009
070000 FUEL SYSTEM, GASOLINE
R0031 This bulletin includes the instructions for the replacement of the fuel system hoses on MDT vehicles equipped with dual fuel tanks.
167-R0904-12
Mar 3, 2009
081100 FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY
R0031 This bulletin includes the instructions for the replacement of the fuel system hoses on MDT vehicles equipped with dual fuel tanks.
167-B0803-12
Dec 5, 2008
203000 WHEELS:LUGS/NUTS/BOLTS/STUDS
SB - 08 - 005 This document is to inform dealers and workshops of the design change to the hood damper, support bolt and the addition of a support collar.
C-0005
Sep 13, 2008
022400 SUSPENSION:REAR:SHOCK ABSORBER
HINO TRUCKS: INCORRECT SHOCK ABSORBERS ON REAR AIR SUSPENSIONS. INCORRECT LENGTH SHOCK ABSORBERS MAY HAVE BEEN INSTALLED ON THE REAR, DRIVER AND OR PASSENGER SIDES OF SUBJECT TRUCKS. *PE
167-R0801-12
Sep 12, 2008
020000 SUSPENSION
C0005 This Service Campaign includes instructions for the inspection and replacement of the shock absorbers used on the rear air suspension.
SB-08-004
Aug 28, 2008
070000 FUEL SYSTEM, GASOLINE
This document is to inform dealers and workshops of the design change to the supply pump and SCV for J08E-TV, TW engine series.
SB-08-004
Aug 28, 2008
356000 EQUIPMENT ADAPTIVE/MOBILITY
This document is to inform dealers and workshops of the design change to the supply pump and SCV for J08E-TV, TW engine series.
SB-08-004
Aug 28, 2008
350000 EQUIPMENT
This document is to inform dealers and workshops of the design change to the supply pump and SCV for J08E-TV, TW engine series.
167-B0806-12
Aug 28, 2008
092100 FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP
08 - 003 This document is to inform dealers and workshops of the design change to the supply pump and SCV for J08E-TV, TW engine series.
167-B0805-12
Aug 27, 2008
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
08 - 003 This document is to inform dealers and work shops to the update of inlet and outlet fuel pipes on the Davco fuel filter assembly.
SB-08-003
Aug 27, 2008
356000 EQUIPMENT ADAPTIVE/MOBILITY
This document is to inform dealers and work shops to the update of inlet and outlet fuel pipes on the Davco fuel filter assembly.
SB-08-003
Aug 27, 2008
090000 FUEL SYSTEM, OTHER
This document is to inform dealers and work shops to the update of inlet and outlet fuel pipes on the Davco fuel filter assembly.
SB-08-003
Aug 27, 2008
350000 EQUIPMENT
This document is to inform dealers and work shops to the update of inlet and outlet fuel pipes on the Davco fuel filter assembly.
167-P0803-12
Mar 5, 2008
060000 ENGINE (PWS)
PTB 01-08 Complete Engine Assembly Part Numbers
167-T0706-12
Jun 28, 2007
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
07 - 006 VOLTAGE DROP TEST
167-B0901-12
Jan 12, 2007
060000 ENGINE (PWS)
SB - 09 - 003 This bulletin provides a procedure to modify the Intake Throttle Valve.
167-B0801-12
Jan 12, 2007
351130 EQUIPMENT:RECREATIONAL VEHICLE/TRAILER:LPG SYSTEMS:TANK VALVE/GAUGE
SB ? 07 - 006 This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The S
167-B0901-12
Jan 12, 2007
100000 POWER TRAIN
SB - 09 - 003 This bulletin provides a procedure to modify the Intake Throttle Valve.
167-B0602-12
Sep 18, 2006
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
SB ? 06 - 002 Fuel Filter Usage. This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel fil
167-B0601-12
Jul 10, 2006
060000 ENGINE AND ENGINE COOLING
SB ? 06 - 001 DESIGN CHANGE OF ENGINE OIL COOLER HOUSING. The casting for the engine oil cooler housing has been revised to include 2 shallow machined grooves on both sides of the engine oil cooler housing. These grooves aid in the retentio
167-B0501-12
Nov 20, 2005
060000 ENGINE (PWS)
05 - 011 CORRECTIONS TO WORKSHOP MANUALS FOR J08 ENGINES. The standard gap between ends of the second piston ring and the oil ring.
167-B0501-12
Nov 20, 2005
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
05 - 011 CORRECTIONS TO WORKSHOP MANUALS FOR J08 ENGINES. The standard gap between ends of the second piston ring and the oil ring.
167-B0506-12
Nov 4, 2005
060000 ENGINE (PWS)
SB ? 05 - 008 This document is to inform the dealers about the addition of the pressure sensor cover and related part for the J08E engine.
167-B0505-12
Nov 4, 2005
356000 EQUIPMENT ADAPTIVE/MOBILITY
SB ? 05 - 007 DESIGN CHANGE OF WATER PIPE FOR J08E
167-B0503-12
Nov 4, 2005
060000 ENGINE (PWS)
SB ? 05 - 010 CORRECTION TO WORKSHOP MANUALS FOR THE J08E ENGINE. a) Resistance between terminals of the air intake pre-heater relay should be 64.0 ? 96.0 Ohms b) Illustration of the air intake pre-heater terminal should be revised. c) R
167-B0503-12
Nov 4, 2005
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB ? 05 - 010 CORRECTION TO WORKSHOP MANUALS FOR THE J08E ENGINE. a) Resistance between terminals of the air intake pre-heater relay should be 64.0 ? 96.0 Ohms b) Illustration of the air intake pre-heater terminal should be revised. c) R
167-B0508-12
Sep 28, 2005
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB - 05 - 005 PROPER MAINTENANCE PROCEDURES FOR GREASE LUBRICATED FRONT AXLES
167-B0508-12
Sep 28, 2005
106000 POWER TRAIN:AXLE ASSEMBLY
SB - 05 - 005 PROPER MAINTENANCE PROCEDURES FOR GREASE LUBRICATED FRONT AXLES
167-B0504-12
Sep 27, 2005
063000 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
SB - 05 - 003 This document is to inform dealers and workshops on procedures to activate exhaust brake operation.
HINO NV8J - All Years Overview
Complete safety history for the HINO NV8J across all model years (2005, 2021).
59
Total Recalls
2
Total Complaints
0
Investigations
2
Reported Crashes
0
Reported Fires
0
Reported Deaths
HINO NV8J - Year by Year
Compare recalls and complaints across model years. Click any year to see full details.