2014 HINO NE8J
1 recalls, 0 complaints - 70 TSBs
14V791000 Dec 15, 2014
PARKING BRAKE
Defect Description
Hino Motor Sales U.S.A., Inc. (Hino) is recalling certain model year 2005-2015 Hino ND8J, NE8J, and NF8J trucks manufactured August 26, 2003, to May 14, 2014. In the affected vehicles, components of the parking brake handle assembly may wear, resulting in either the parking brake unexpectedly rele... Read more
Consequence
Either parking brake condition may result in the vehicle rolling unexpectedly, increasing the risk of a crash.
Remedy
Hino will notify owners, and dealers will install a new parking brake lever that contains a two-way damper and a roller at the cable joining pin, free of charge. The recall began February 2, 2015. Owners may contact Hino customer service at 1-248-699-9330. Hino's number for this recall is A9970. ... Read more
No complaints found for this vehicle.
Technical Service Bulletins, 2014 HINO NE8J
70 manufacturer communications from 44 unique bulletins. TSBs describe known problems and recommended fixes from the manufacturer.
Most Affected Components
| Component | Bulletins |
|---|---|
| 355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL | 12 |
| 350000 EQUIPMENT | 9 |
| 110000 ELECTRICAL SYSTEM | 5 |
| 060000 ENGINE (PWS) | 4 |
| 118000 ELECTRICAL SYSTEM:SOFTWARE | 3 |
| 353000 EQUIPMENT:ELECTRICAL | 3 |
| 061610 ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE | 3 |
| 356000 EQUIPMENT ADAPTIVE/MOBILITY | 3 |
167-T1701-03
Feb 14, 2017
111000 ELECTRICAL SYSTEM:12V/24V/48V BATTERY
Beginning with the 2017 model year, Hino changed the standard battery from a group 27 to a group 31. In the event that a group 27 battery must be replaced, it is recommended to use the group 31 as the service replacement for 2014MY and newe
167-B1426-12
Nov 4, 2016
162810 STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS
SA-14-026 The broken hood grille procedure (SB-14-020) has been revised to reuse the grille nuts (SZ17906009) if possible. There is a limited quantity of the nuts available and it has been confirmed that the nuts are reusable. The revised p
167-B0502-12
Sep 28, 2016
110000 ELECTRICAL SYSTEM
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B0502-12
Sep 28, 2016
190000 TIRES
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B0502-12
Sep 28, 2016
350000 EQUIPMENT
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B1625-12
Aug 5, 2016
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-16-021 CORRECTION OF WORKSHOP MANUAL FOR HINO600 SERIES Correction of Electrical Wiring Diagram
167-B1621-12
Apr 18, 2016
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-16-010 Correction of the inspection of the DPR filter.
167-P1602-12
Mar 22, 2016
072100 FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
13-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified
167-P1602-12
Mar 22, 2016
060000 ENGINE (PWS)
13-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified
167-B1529-12
Oct 21, 2015
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-15-032 Troubleshooting information and Inspection procedure of the DTC/P2030 were revised.
167-B1528-12
Aug 26, 2015
353000 EQUIPMENT:ELECTRICAL
SB-15-031 Foreign debris in the DEF (Diesel Exhaust Fluid) tank may cause the SCR (Selective Catalyst Reduction) system to malfunction. This can result in DTC?s (Diagnostic Trouble Codes) P20E8 or P20E9 - DEF Pressure Abnormality. An inlet
167-B1527-12
Jul 7, 2015
353000 EQUIPMENT:ELECTRICAL
SB-15-030 On subject vehicles, the MIL (Malfunction Indicator Lamp) may illuminate with DTC (Diagnostic Trouble Code) U02A2 stored in the engine ECU. This may be due to a malfunction of the DEF (Diesel Exhaust Fluid) tank sensor assembly. P
167-T1514-12
Jun 22, 2015
162000 STRUCTURE:BODY
TT-15-016 The purpose of this publication is to communicate the standard measuring positions on the Hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
167-B1523-12
Jun 2, 2015
060000 ENGINE AND ENGINE COOLING
SB-15-026 A subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a servic
167-T1513-12
Apr 22, 2015
100000 POWER TRAIN
TT-15-014 The transmission DTC?s P0974 and P0986, may be found on 12MY-15MY COE models. There could also be a complaint of low power and erratic shifting. These diagnostic codes may be set due to low voltage between the transmission case an
167-B1312-12
Apr 13, 2015
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-13-009 This bulletin is to inform dealers and workshops of proper paint codes for all Hino models. ALL MODELS
167-B1515-12
Mar 6, 2015
063200 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
SB-15-016 New parts are available to prevent repeat exhaust manifold stud failures on the J05 engine. This bulletin provides instructions for installing longer manifold studs at the #4 cylinder location.
167-B1511-12
Feb 4, 2015
011000 STEERING: STEERING WHEEL/HANDLE BAR
SB-15-011 The following TSB (Technical Service Bulletin) outlines the inspection method for steering wheel free play and the adjustment procedure of the steering gear.
RCB-003-15
Jan 26, 2015
350000 EQUIPMENT
If the parking brake is not released in accordance with the instructions in the Driver?s/Owner?s Manual (such as releasing the parking brake lever only by pushing the lever release button, without holding the lever with the hand, until it i
RCB-003-15
Jan 26, 2015
050000 PARKING BRAKE
If the parking brake is not released in accordance with the instructions in the Driver?s/Owner?s Manual (such as releasing the parking brake lever only by pushing the lever release button, without holding the lever with the hand, until it i
167-B1510-12
Jan 20, 2015
063130 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE)
SB-15-010 Some vehicles that operate in extreme cold weather climates may exhibit ice accumulation on the EGR (Exhaust Gas Recirculation) butterfly plate with a repeat P1604 DTC (Diagnostic Trouble Code) stored in the engine ECU. A heated E
167-B1503-12
Jan 9, 2015
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-15-002 CORRECTION OF WORKSHOP MANUAL FOR 2013 - 2015MY (REVISION OF TROUBLESHOOTING PROCEDURE FOR THE DTC P2123)
167-B1504-12
Jan 9, 2015
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-15-003 CORRECTION OF WORKSHOP MANUAL FOR HINO 2015MY (REVISION OF TROUBLESHOOTING PROCEDURE FOR THE DTC P0421)
TT-14-033
Dec 5, 2014
350000 EQUIPMENT
When replacing an engine block with service part no., 11401E0380 there is potential that 2 rear oil passage plugs may be missing in the rear of the replacement engine block. In the event your replacement engine block does not have these 2 o
TT-14-033
Dec 5, 2014
061500 ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION
When replacing an engine block with service part no., 11401E0380 there is potential that 2 rear oil passage plugs may be missing in the rear of the replacement engine block. In the event your replacement engine block does not have these 2 o
SB-14-020
Sep 22, 2014
350000 EQUIPMENT
When replacing a broken hood grille, an enhanced replacement hood grille is available. This procedure should be used when installing this enhanced grille to make certain that the hood grille is correctly installed.
SB-14-020
Sep 22, 2014
162810 STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS
When replacing a broken hood grille, an enhanced replacement hood grille is available. This procedure should be used when installing this enhanced grille to make certain that the hood grille is correctly installed.
SB-14-020
Sep 22, 2014
356000 EQUIPMENT ADAPTIVE/MOBILITY
When replacing a broken hood grille, an enhanced replacement hood grille is available. This procedure should be used when installing this enhanced grille to make certain that the hood grille is correctly installed.
SB-14-016
Sep 8, 2014
110000 ELECTRICAL SYSTEM
In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to overheating
SB-14-016
Sep 8, 2014
036400 SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:ABS WARNING LIGHT
In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to overheating
SB-14-016
Sep 8, 2014
100000 POWER TRAIN
In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to overheating
SB-14-014
Jul 25, 2014
061610 ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
Subject vehicles may exhibit a concern where manual regeneration does not complete within one hour of depressing the manual regeneration button. In these cases, there will be no indicators showing why manual regeneration will not complete.
SB-14-014
Jul 25, 2014
350000 EQUIPMENT
Subject vehicles may exhibit a concern where manual regeneration does not complete within one hour of depressing the manual regeneration button. In these cases, there will be no indicators showing why manual regeneration will not complete.
SB-14-013
Jul 23, 2014
061610 ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
DPR damage, "Burner misfire due to excessive soot on the burner igniter surface", and "DPR push out" may occur due to the increase in the amount of soot in exhaust gas as a result of engine component degradation. In order to reduce the soot
SB-14-013
Jul 23, 2014
350000 EQUIPMENT
DPR damage, "Burner misfire due to excessive soot on the burner igniter surface", and "DPR push out" may occur due to the increase in the amount of soot in exhaust gas as a result of engine component degradation. In order to reduce the soot
SB-14-013
Jul 23, 2014
070000 FUEL SYSTEM, GASOLINE
DPR damage, "Burner misfire due to excessive soot on the burner igniter surface", and "DPR push out" may occur due to the increase in the amount of soot in exhaust gas as a result of engine component degradation. In order to reduce the soot
SB-14-013
Jul 23, 2014
063000 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
DPR damage, "Burner misfire due to excessive soot on the burner igniter surface", and "DPR push out" may occur due to the increase in the amount of soot in exhaust gas as a result of engine component degradation. In order to reduce the soot
167-B1423-12
Jun 19, 2014
118000 ELECTRICAL SYSTEM:SOFTWARE
SB-14-005 2011MY-2015MY Conventional Keyless Entry Programming
167-B1423-12
Jun 19, 2014
353000 EQUIPMENT:ELECTRICAL
SB-14-005 2011MY-2015MY Conventional Keyless Entry Programming
167-B1417-12
Jun 17, 2014
118000 ELECTRICAL SYSTEM:SOFTWARE
SB-14-004 In the event that a subject vehicle exhibits an illuminated Malfunction Indicator Lamp (MIL) and a P026C (Abnormal Injection Quantity) DTC is stored in the engine ECU, enhanced ECU software is available to correct this concern.
SB-14-004
Jun 17, 2014
061610 ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE
In the event that a subject vehicle exhibits an illuminated Malfunction Indicator Lamp (MIL) and a P026C (Abnormal Injection Quantity) DTC is stored in the engine ECU, enhanced ECU software is available to correct this concern.
167-B1417-12
Jun 17, 2014
118000 ELECTRICAL SYSTEM:SOFTWARE
SB-14-004 In the event that a subject vehicle exhibits an illuminated Malfunction Indicator Lamp (MIL) and a P026C (Abnormal Injection Quantity) DTC is stored in the engine ECU, enhanced ECU software is available to correct this concern.
SB-14-004
Jun 17, 2014
120000 EXTERIOR LIGHTING
In the event that a subject vehicle exhibits an illuminated Malfunction Indicator Lamp (MIL) and a P026C (Abnormal Injection Quantity) DTC is stored in the engine ECU, enhanced ECU software is available to correct this concern.
SB-14-004
Jun 17, 2014
102000 POWER TRAIN:MANUAL TRANSMISSION
In the event that a subject vehicle exhibits an illuminated Malfunction Indicator Lamp (MIL) and a P026C (Abnormal Injection Quantity) DTC is stored in the engine ECU, enhanced ECU software is available to correct this concern.
167-B1415-12
Mar 28, 2014
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-14-003 The following is to inform you of the revision of the inspection procedure for the DTC?s P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to us
TSB-14-025
Feb 5, 2014
110000 ELECTRICAL SYSTEM
Subject vehicles may exhibit electrical symptoms which can include, but are not limited to erratic operation of the exterior lamps, warning lamps illuminated in the instrument cluster, or erroneous DTC?s (Diagnostic Trouble Codes) setting i
TSB-14-025
Feb 5, 2014
350000 EQUIPMENT
Subject vehicles may exhibit electrical symptoms which can include, but are not limited to erratic operation of the exterior lamps, warning lamps illuminated in the instrument cluster, or erroneous DTC?s (Diagnostic Trouble Codes) setting i
SB-15-010
Jan 20, 2014
350000 EQUIPMENT
Some vehicles that operate in extreme cold weather climates may exhibit ice accumulation on the EGR (Exhaust Gas Recirculation) butterfly plate with a repeat P1604 DTC (Diagnostic Trouble Code) stored in the engine ECU. A heated EGR valve h
SB-15-010
Jan 20, 2014
063130 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE)
Some vehicles that operate in extreme cold weather climates may exhibit ice accumulation on the EGR (Exhaust Gas Recirculation) butterfly plate with a repeat P1604 DTC (Diagnostic Trouble Code) stored in the engine ECU. A heated EGR valve h
SB-15-010
Jan 20, 2014
356000 EQUIPMENT ADAPTIVE/MOBILITY
Some vehicles that operate in extreme cold weather climates may exhibit ice accumulation on the EGR (Exhaust Gas Recirculation) butterfly plate with a repeat P1604 DTC (Diagnostic Trouble Code) stored in the engine ECU. A heated EGR valve h
14-002
Jan 9, 2014
062000 ENGINE AND ENGINE COOLING:COOLING SYSTEM
COE HYBRID SAFETY EQUIPMENT, TOOLS AND PRACTICES
14-002
Jan 9, 2014
110000 ELECTRICAL SYSTEM
COE HYBRID SAFETY EQUIPMENT, TOOLS AND PRACTICES
14-002
Jan 9, 2014
350000 EQUIPMENT
COE HYBRID SAFETY EQUIPMENT, TOOLS AND PRACTICES
167-B1307-12
Jul 23, 2013
103300 POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)
13-008 Design Change of the Idler Gear Case and Idler Gear Bolt. Abnormal load such as a stuck supply pump was applied to gear train then causing the bolt to loosen. Therefore, an enhancement to the case and bolt were carried out. The idle
167-B1301-12
Jul 2, 2013
110000 ELECTRICAL SYSTEM
SB-13-003 In some cases the parking brake lamp indicator may remain illuminated with the parking brake lever in the ?off? position. This TSB (Technical Service Bulletin) will provide instructions for installing an enhanced parking brake swi
167-B1301-12
Jul 2, 2013
050000 PARKING BRAKE
SB-13-003 In some cases the parking brake lamp indicator may remain illuminated with the parking brake lever in the ?off? position. This TSB (Technical Service Bulletin) will provide instructions for installing an enhanced parking brake swi
167-T1303-12
Jun 21, 2013
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
13-003 Injection Quantity Test 11 thru 14MY
167-B0803-12
Dec 5, 2008
203000 WHEELS:LUGS/NUTS/BOLTS/STUDS
SB - 08 - 005 This document is to inform dealers and workshops of the design change to the hood damper, support bolt and the addition of a support collar.
167-T0706-12
Jun 28, 2007
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
07 - 006 VOLTAGE DROP TEST
167-B0602-12
Sep 18, 2006
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
SB ? 06 - 002 Fuel Filter Usage. This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel fil
167-B0601-12
Jul 10, 2006
060000 ENGINE AND ENGINE COOLING
SB ? 06 - 001 DESIGN CHANGE OF ENGINE OIL COOLER HOUSING. The casting for the engine oil cooler housing has been revised to include 2 shallow machined grooves on both sides of the engine oil cooler housing. These grooves aid in the retentio
167-B0501-12
Nov 20, 2005
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
05 - 011 CORRECTIONS TO WORKSHOP MANUALS FOR J08 ENGINES. The standard gap between ends of the second piston ring and the oil ring.
167-B0501-12
Nov 20, 2005
060000 ENGINE (PWS)
05 - 011 CORRECTIONS TO WORKSHOP MANUALS FOR J08 ENGINES. The standard gap between ends of the second piston ring and the oil ring.
167-B0503-12
Nov 4, 2005
060000 ENGINE (PWS)
SB ? 05 - 010 CORRECTION TO WORKSHOP MANUALS FOR THE J08E ENGINE. a) Resistance between terminals of the air intake pre-heater relay should be 64.0 ? 96.0 Ohms b) Illustration of the air intake pre-heater terminal should be revised. c) R
167-B0503-12
Nov 4, 2005
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB ? 05 - 010 CORRECTION TO WORKSHOP MANUALS FOR THE J08E ENGINE. a) Resistance between terminals of the air intake pre-heater relay should be 64.0 ? 96.0 Ohms b) Illustration of the air intake pre-heater terminal should be revised. c) R
167-B0505-12
Nov 4, 2005
356000 EQUIPMENT ADAPTIVE/MOBILITY
SB ? 05 - 007 DESIGN CHANGE OF WATER PIPE FOR J08E
167-B0506-12
Nov 4, 2005
060000 ENGINE (PWS)
SB ? 05 - 008 This document is to inform the dealers about the addition of the pressure sensor cover and related part for the J08E engine.
167-B0508-12
Sep 28, 2005
106000 POWER TRAIN:AXLE ASSEMBLY
SB - 05 - 005 PROPER MAINTENANCE PROCEDURES FOR GREASE LUBRICATED FRONT AXLES
167-B0508-12
Sep 28, 2005
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB - 05 - 005 PROPER MAINTENANCE PROCEDURES FOR GREASE LUBRICATED FRONT AXLES
167-B0504-12
Sep 27, 2005
063000 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
SB - 05 - 003 This document is to inform dealers and workshops on procedures to activate exhaust brake operation.
HINO NE8J - All Years Overview
Complete safety history for the HINO NE8J across all model years (2005, 2021).
61
Total Recalls
0
Total Complaints
0
Investigations
0
Reported Crashes
0
Reported Fires
0
Reported Deaths
HINO NE8J - Year by Year
Compare recalls and complaints across model years. Click any year to see full details.