2008 HINO NB6J
4 recalls, 0 complaints - 66 TSBs
12V555000 Dec 3, 2012
ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES
Defect Description
Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to... Read more
Consequence
If the B+ circuit shorts to ground, it may lead to a fire.
Remedy
Hino will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 17, 2013. Owners may contact Hino at 1-248-699-9390.
08V195000 Apr 30, 2008
SUSPENSION:FRONT
Defect Description
HINO IS RECALLING 16,805 MY 2005-2008 NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, AND NV8J TRUCKS. THE TWO VERTICAL RIGHT/LEFT SIDE FRONT SPRING BRACKET BOLTS WERE NOT TIGHTENED PROPERLY DURING THE ASSEMBLY PROCESS. THIS MAY CAUSE INCREASED STRESS ON THE SPRING BRACKET WHICH CAN LEAD TO CRACKING OF THE BR... Read more
Consequence
THIS COULD REDUCE STEERING CONTROL INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL REPLACE THE VERTICAL FRONT SPRING BRACKET ATTACHMENT BOLTS ON RIGHT/LEFT HANGER BRACKETS AND RE-TORQUE ALL ASSOCIATED BOLTS FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 8, 2008. OWNERS MAY CONTACT HINO AT 248-699-9300.
07V508000 Oct 30, 2007
VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR
Defect Description
ON CERTAIN TRUCKS, THE SIDE VIEW MIRRORS MAY HAVE BEEN INSTALLED INCORRECTLY POSSIBLY LEADING TO THE MIRROR GLASS DETACHING FROM THE MIRROR HOUSING.
Consequence
IF THE MIRROR GLASS IS LOST, THE DRIVER MAY NOT BE ABLE TO SEE TRAFFIC APPROACHING FROM THE REAR INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL INSPECT THE SIDE VIEW MIRRORS AND, IF NECESSARY, REPLACE THE MIRROR MATERIALS. THE RECALL BEGAN ON JUNE 12, 2007. OWNERS MAY CONTACT HINO AT 1-248-648-6490.
07V209000 May 15, 2007
FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Defect Description
ON CERTAIN TRUCKS, DUE TO INSUFFICIENT BRACKET STIFFNESS AND OVER-TIGHTENING OF THE CLIP, THE FUEL PIPE BETWEEN THE SUPPLY PUMP AND THE COMMON RAIL MAY CRACK.
Consequence
THE ENGINE WARNING LIGHT WILL ALERT THE DRIVER OF THE PROBLEM. IF THE WARNING LIGHT IS IGNORED BY THE DRIVER, THIS COULD ULTIMATELY CAUSE A FIRE AND THE ENGINE TO STALL.
Remedy
DEALERS WILL INSPECT THE BRACKET AND THE CLIP AND REPLACE THE NECESSARY PARTS FREE OF CHARGE. THE RECALL BEGAN ON MAY 1, 2008. OWNERS MAY CONTACT HINO AT 248-648-6430.
No complaints found for this vehicle.
Technical Service Bulletins, 2008 HINO NB6J
66 manufacturer communications from 49 unique bulletins. TSBs describe known problems and recommended fixes from the manufacturer.
Most Affected Components
| Component | Bulletins |
|---|---|
| 355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL | 8 |
| 060000 ENGINE (PWS) | 6 |
| 061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER | 5 |
| 350000 EQUIPMENT | 4 |
| 061200 ENGINE AND ENGINE COOLING:ENGINE:DIESEL | 2 |
| 200000 WHEELS | 2 |
| 356000 EQUIPMENT ADAPTIVE/MOBILITY | 2 |
| 072100 FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP | 2 |
167-T1612-12
Oct 19, 2016
060000 ENGINE (PWS)
TT-16-013 The procedure for installing the rocker shaft bolts into the cam housing has been updated. It is recommended to lightly lubricate the threads and flange of the bolts with clean engine oil before installing them. The torque specifi
167-B0502-12
Sep 28, 2016
350000 EQUIPMENT
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B0502-12
Sep 28, 2016
190000 TIRES
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B0502-12
Sep 28, 2016
110000 ELECTRICAL SYSTEM
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B1621-12
Apr 18, 2016
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-16-010 Correction of the inspection of the DPR filter.
167-P1602-12
Mar 22, 2016
060000 ENGINE (PWS)
13-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified
167-P1602-12
Mar 22, 2016
072100 FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
13-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified
167-T1514-12
Jun 22, 2015
162000 STRUCTURE:BODY
TT-15-016 The purpose of this publication is to communicate the standard measuring positions on the Hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
167-B1523-12
Jun 2, 2015
060000 ENGINE AND ENGINE COOLING
SB-15-026 A subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a servic
167-B1312-12
Apr 13, 2015
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-13-009 This bulletin is to inform dealers and workshops of proper paint codes for all Hino models. ALL MODELS
167-B1521-12
Mar 17, 2015
020000 SUSPENSION
SB-15-022 In the rare event that a subject vehicle equipped with the 23k Comfort Ride air suspension experiences a premature main leaf failure, a 23k HD Comfort Ride air suspension may be installed with PRIOR APPROVAL from HMM QA.
167-B1516-12
Mar 6, 2015
063200 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
SB-15-017 New parts are available to prevent repeat exhaust manifold stud failures on the J05 engine. This bulletin provides instructions for an exhaust manifold attachment modification at the #1 and #4 cylinder locations. Modifications to
167-B1514-12
Feb 12, 2015
100000 POWER TRAIN
SB-15-015 Information of Troubleshooting Procedure for Engine Lacked Power during the DPR Automatic Regeneration
167-B1509-12
Jan 22, 2015
113000 ELECTRICAL SYSTEM:STARTER ASSEMBLY
SB-15-009 This bulletin provides the corrective action for a fluid overflow condition from the main housing breather at startup in cold ambient temperatures at or below +5F (-15C).
167-T1425-12
Nov 19, 2014
117000 ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
TT-14-029 A subject vehicle at 200,000 miles may exhibit a "DPR Maintenance" message displayed on the Instrument Cluster message center. The following procedure will instruct how to check the DPF and reset the displayed message.
167-T1420-12
Aug 1, 2014
162800 STRUCTURE:BODY:HOOD
TT-14-021 This procedure illustrates a worst case scenario repair procedure, the process and materials being used are the same for all repairs. Depending on the location of the repair, access may be limited in some cases. Ensure that the re
167-T1420-12
Aug 1, 2014
350000 EQUIPMENT
TT-14-021 This procedure illustrates a worst case scenario repair procedure, the process and materials being used are the same for all repairs. Depending on the location of the repair, access may be limited in some cases. Ensure that the re
167-B1415-12
Mar 28, 2014
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-14-003 The following is to inform you of the revision of the inspection procedure for the DTC?s P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to us
167-R1405-12
Feb 21, 2014
093000 FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM
RCB-010-12 When soot accumulates in the DPF (Diesel Particulate Filter) due to aging degradation of the fuel injector, the engine control program could potentially work improperly, which may cause the CEL (Check Engine Light) in the instrum
167-R1405-12
Feb 21, 2014
080000 FUEL SYSTEM, DIESEL
RCB-010-12 When soot accumulates in the DPF (Diesel Particulate Filter) due to aging degradation of the fuel injector, the engine control program could potentially work improperly, which may cause the CEL (Check Engine Light) in the instrum
RCB-010-12
Feb 21, 2014
118000 ELECTRICAL SYSTEM:SOFTWARE
HINO: THE ENGINE CONTROL PROGRAM COULD WORK IMPROPERLY, CAUSING CHECK ENGINE LIGHT (CEL) TO TURN ON, DUE TO AGING DEGRADATION OF FUEL INJECTOR AND SOOT ACCUMULATING IN DIESEL PARTICULATE FILTER (DPF). MODEL 2008-2010 NA6J, NB6J, NC6J, ND8
RCB-010-12
Feb 21, 2014
061200 ENGINE AND ENGINE COOLING:ENGINE:DIESEL
HINO: THE ENGINE CONTROL PROGRAM COULD WORK IMPROPERLY, CAUSING CHECK ENGINE LIGHT (CEL) TO TURN ON, DUE TO AGING DEGRADATION OF FUEL INJECTOR AND SOOT ACCUMULATING IN DIESEL PARTICULATE FILTER (DPF). MODEL 2008-2010 NA6J, NB6J, NC6J, ND8
167-B1307-12
Jul 23, 2013
103300 POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)
13-008 Design Change of the Idler Gear Case and Idler Gear Bolt. Abnormal load such as a stuck supply pump was applied to gear train then causing the bolt to loosen. Therefore, an enhancement to the case and bolt were carried out. The idle
167-R1301-12
May 31, 2013
060000 ENGINE (PWS)
RCB-010-12 When soot accumulates in the DPF (Diesel Particulate Filter) due to aging degradation of the fuel injector, the engine control program could potentially work improperly, which may cause the CEL (Check Engine Light) in the instrum
167-B1101-12
Aug 10, 2011
090000 FUEL SYSTEM, OTHER
SB-11-002 REQUIREMENTS OF BIOFUEL USAGE FOR 2008MY THRU 2012MY VEHICLES ALL APPLIED MODELS
167-R0901-12
Jun 16, 2011
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
RCB-003-11 This bulletin involves the inspection of the Variable Nozzle Turbine (VNT) turbocharger linkrod along with the potential replacement of the VNT turbocharger assembly.
LT-0010
Jun 1, 2009
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Hino Quick Reference Guide 2005-2010 Model Years
R-0024
Mar 3, 2009
063100 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
HINO TRUCKS: UNDER CERTAIN DRIVING CONDITIONS, THE ENGINE CONTROL PROGRAM DOES NOT PROVIDE SATISFACTORY DRIVABILITY CHARACTERISTICS. *PE
R-0024
Mar 3, 2009
061200 ENGINE AND ENGINE COOLING:ENGINE:DIESEL
HINO TRUCKS: UNDER CERTAIN DRIVING CONDITIONS, THE ENGINE CONTROL PROGRAM DOES NOT PROVIDE SATISFACTORY DRIVABILITY CHARACTERISTICS. *PE
SB-R-0029
Mar 3, 2009
092200 FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
HINO TRUCKS: THE FUEL TANK BREATHER HOSE(S) HAS BEEN MODIFIED TO PREVENT WATER FROM ENTERING INTO THE FUEL TANK(S). *PE
SB-R-0034
Mar 3, 2009
061000 ENGINE AND ENGINE COOLING:ENGINE
HINO TRUCKS: ABNORMAL NOISE AND VIBRATION WITHIN THE ENGINE OCCURS DUE TO THE IMPEDED OPERATION OF THE INJECTOR NEEDLE WHICH IS CAUSED BY THE FORMATION OF DEPOSITS IN THE FUEL. *PE
167-R0901-12
Mar 3, 2009
081100 FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY
R0029 This bulletin includes instructions for the replacement of the fuel tank breather hose. If the vehicle is equipped with dual fuel tanks the breather hose must be replaced on both fuel tanks.
167-R0902-12
Mar 3, 2009
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
R0034 This bulletin includes the instructions to complete the following. 1. Determine the condition of the fuel injectors by monitoring quantity value using Hino Diagnostic Explorer. 2. If the fuel injector condition is determined to be ?
167-R0903-12
Mar 3, 2009
070000 FUEL SYSTEM, GASOLINE
R0032 This bulletin includes the instructions for the replacement of the fuel system hoses.
SB-R-0034
Mar 3, 2009
073200 FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS
HINO TRUCKS: ABNORMAL NOISE AND VIBRATION WITHIN THE ENGINE OCCURS DUE TO THE IMPEDED OPERATION OF THE INJECTOR NEEDLE WHICH IS CAUSED BY THE FORMATION OF DEPOSITS IN THE FUEL. *PE
SL-R-0032
Mar 3, 2009
072200 FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
HINO TRUCKS: ABNORMAL NOISE AND VIBRATION WITHIN THE ENGINE OCCURS DUE TO THE IMPEDED OPERATION OF THE INJECTOR NEEDLE WHICH IS CAUSED BY THE FORMATION OF DEPOSITS IN THE FUEL. *PE
SB-09-002
Feb 24, 2009
060000 ENGINE (PWS)
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary.
SB-09-002
Feb 24, 2009
350000 EQUIPMENT
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary.
167-B0803-12
Dec 5, 2008
203000 WHEELS:LUGS/NUTS/BOLTS/STUDS
SB - 08 - 005 This document is to inform dealers and workshops of the design change to the hood damper, support bolt and the addition of a support collar.
167-B0804-12
Aug 28, 2008
060000 ENGINE (PWS)
08 - 002 This document is to inform dealers and workshops of the design change to the exhaust gas recirculation (EGR) valve and gasket for the J05D-TF engine series.
167-B0804-12
Aug 28, 2008
063000 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
08 - 002 This document is to inform dealers and workshops of the design change to the exhaust gas recirculation (EGR) valve and gasket for the J05D-TF engine series.
167-P0805-12
Apr 12, 2008
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
PTB 08-08 2005-2008 Quick Reference Guide Correction to Page 60
167-P0805-12
Apr 12, 2008
200000 WHEELS
PTB 08-08 2005-2008 Quick Reference Guide Correction to Page 60
167-B0802-12
Apr 9, 2008
063110 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)
SB - 08 - 001 This document is to inform dealers and workshops on the installation procedures for a crankcase breather (ventilator) anti freezing kit.
167-P0802-12
Mar 10, 2008
021240 SUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY
PTB 03-08 Spring Assemblies.
167-P0802-12
Mar 10, 2008
356000 EQUIPMENT ADAPTIVE/MOBILITY
PTB 03-08 Spring Assemblies.
167-P0803-12
Mar 5, 2008
060000 ENGINE (PWS)
PTB 01-08 Complete Engine Assembly Part Numbers
167-B0704-12
Nov 29, 2007
103700 POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER
SB - 07 - 008 CORRECTION IN WORKSHOP MANUAL FOR TIGHTENING TORQUE OF THE INJECTOR CLAMP BOLT
167-T0707-12
Oct 9, 2007
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
07 - 008 DX REPORT ? EXPORTING, SAVING AND PRINTING FROM PAST WORK INFORMATION
167-P0702-12
Oct 4, 2007
072100 FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Revised Warranty Process ? Denso Fuel Pumps & Injector Nozzles Exchange Denso Fuel Pumps & Injector Nozzles. Effective immediately, fuel pumps and injector nozzles replaced under warranty are to be purchased from the Memphis PDC. It is no
167-T0706-12
Jun 28, 2007
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
07 - 006 VOLTAGE DROP TEST
167-P0701-12
Jun 20, 2007
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
Introduction of Exchange Turbocharger Program. Hino Trucks is pleased to announce the introduction of the Turbocharger Exchange Program for its 2005 ? 2008 Model Year trucks. Effective June 21, 2007, the following turbocharger part numbers
167-T0705-12
Jun 20, 2007
125100 EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
07 - 005 No Throttle Response (brake light switch)
167-T0704-12
May 25, 2007
200000 WHEELS
07 - 004 ABS Wheel Sensor (active fault 3-1 thru 3-4)
167-B0702-12
Apr 24, 2007
021600 SUSPENSION:FRONT:WHEEL BEARING
SB - 07 - 005 The document is to inform the dealers about the change in material and tightening torque of the rocker arm support bolts and camshaft bearing cap bolts.
167-B0702-12
Apr 24, 2007
356000 EQUIPMENT ADAPTIVE/MOBILITY
SB - 07 - 005 The document is to inform the dealers about the change in material and tightening torque of the rocker arm support bolts and camshaft bearing cap bolts.
SB-07-002
Feb 10, 2007
350000 EQUIPMENT
This bulletin provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
SB-07-002
Feb 10, 2007
010000 STEERING
This bulletin provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
SB-07-002
Feb 10, 2007
021600 SUSPENSION:FRONT:WHEEL BEARING
This bulletin provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
167-P0703-12
Jan 9, 2007
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
TB-001-07 Hino uses both Davco and Racor fuel/water separators on its vehicles. To determine the correct filter you must know which one is on the vehicle. The Davco is shown on the left. The Racor is shown on the right and has a primer butt
167-B0602-12
Sep 18, 2006
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
SB ? 06 - 002 Fuel Filter Usage. This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel fil
167-B0601-12
Jul 10, 2006
060000 ENGINE AND ENGINE COOLING
SB ? 06 - 001 DESIGN CHANGE OF ENGINE OIL COOLER HOUSING. The casting for the engine oil cooler housing has been revised to include 2 shallow machined grooves on both sides of the engine oil cooler housing. These grooves aid in the retentio
167-B0508-12
Sep 28, 2005
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB - 05 - 005 PROPER MAINTENANCE PROCEDURES FOR GREASE LUBRICATED FRONT AXLES
167-B0508-12
Sep 28, 2005
106000 POWER TRAIN:AXLE ASSEMBLY
SB - 05 - 005 PROPER MAINTENANCE PROCEDURES FOR GREASE LUBRICATED FRONT AXLES
167-B0509-12
Sep 28, 2005
103000 POWER TRAIN:AUTOMATIC TRANSMISSION
SB ? 05 - 006 Upon removal of a transmission assembly from the vehicle, inspection is required to confirm the presence and correct installation of the two dowel pins in the rear engine housing. In some rare cases one or both dowel pins may
167-B0504-12
Sep 27, 2005
063000 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
SB - 05 - 003 This document is to inform dealers and workshops on procedures to activate exhaust brake operation.
HINO NB6J - All Years Overview
Complete safety history for the HINO NB6J across all model years (2005, 2013).
23
Total Recalls
0
Total Complaints
0
Investigations
0
Reported Crashes
0
Reported Fires
0
Reported Deaths