2007 HINO NA6J
3 recalls, 0 complaints - 58 TSBs
12V555000 Dec 3, 2012
ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES
Defect Description
Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to... Read more
Consequence
If the B+ circuit shorts to ground, it may lead to a fire.
Remedy
Hino will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 17, 2013. Owners may contact Hino at 1-248-699-9390.
08V195000 Apr 30, 2008
SUSPENSION:FRONT
Defect Description
HINO IS RECALLING 16,805 MY 2005-2008 NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, AND NV8J TRUCKS. THE TWO VERTICAL RIGHT/LEFT SIDE FRONT SPRING BRACKET BOLTS WERE NOT TIGHTENED PROPERLY DURING THE ASSEMBLY PROCESS. THIS MAY CAUSE INCREASED STRESS ON THE SPRING BRACKET WHICH CAN LEAD TO CRACKING OF THE BR... Read more
Consequence
THIS COULD REDUCE STEERING CONTROL INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL REPLACE THE VERTICAL FRONT SPRING BRACKET ATTACHMENT BOLTS ON RIGHT/LEFT HANGER BRACKETS AND RE-TORQUE ALL ASSOCIATED BOLTS FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 8, 2008. OWNERS MAY CONTACT HINO AT 248-699-9300.
06V169000 May 18, 2006
STEERING:LINKAGES
Defect Description
ON CERTAIN TRUCKS, DURING ASSEMBLY, THE DRAG LINK ATTACHMENT NUTS AT THE PITMAN ARM AND STEERING ARM MAY HAVE BEEN INCORRECTLY TORQUED. RESIDUAL GREASE AND PAINT WHICH WAS APPLIED AS A RUST INHIBITOR ON THE STEERING ARM MAY HAVE CONTRIBUTED TO A LOSS OF TORQUE AFTER ASSEMBLY.
Consequence
INCREASED WEAR FOR THE DRAGLINK CONNECTIONS CAN OCCUR CREATING A NOTICEABLE INCREASE IN THE AMOUNT OF STEERING WHEEL FREE PLAY. IF THIS CONDITION WAS IGNORED, A LOSS OF STEERING CONTROL OF THE VEHICLE COULD OCCUR WHICH COULD RESULT IN A CRASH.
Remedy
DEALERS WILL INSPECT THE STEERING ARM TIGHTNESS AND REMOVE ALL GREASE AND PAINT FROM THE STEERING ARMS AND RETORQUE THE DRAGLINK ATTACHMENT NUTS AT THE STEERING ARM AND PITMAN ARM. THE RECALL BEGAN ON MAY 12, 2006. OWNERS MAY CONTACT HINO AT 1-248-648-6430.
No complaints found for this vehicle.
Technical Service Bulletins, 2007 HINO NA6J
58 manufacturer communications from 38 unique bulletins. TSBs describe known problems and recommended fixes from the manufacturer.
Most Affected Components
| Component | Bulletins |
|---|---|
| 355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL | 9 |
| 350000 EQUIPMENT | 9 |
| 060000 ENGINE (PWS) | 4 |
| 061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER | 3 |
| 356000 EQUIPMENT ADAPTIVE/MOBILITY | 3 |
| 021600 SUSPENSION:FRONT:WHEEL BEARING | 3 |
| 200000 WHEELS | 3 |
| 072100 FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP | 2 |
167-B0502-12
Sep 28, 2016
110000 ELECTRICAL SYSTEM
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B0502-12
Sep 28, 2016
190000 TIRES
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-B0502-12
Sep 28, 2016
350000 EQUIPMENT
SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
167-P1602-12
Mar 22, 2016
072100 FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
13-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified
167-P1602-12
Mar 22, 2016
060000 ENGINE (PWS)
13-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified
167-T1514-12
Jun 22, 2015
162000 STRUCTURE:BODY
TT-15-016 The purpose of this publication is to communicate the standard measuring positions on the Hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards t
167-B1523-12
Jun 2, 2015
060000 ENGINE AND ENGINE COOLING
SB-15-026 A subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a servic
167-B1312-12
Apr 13, 2015
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-13-009 This bulletin is to inform dealers and workshops of proper paint codes for all Hino models. ALL MODELS
167-B1509-12
Jan 22, 2015
113000 ELECTRICAL SYSTEM:STARTER ASSEMBLY
SB-15-009 This bulletin provides the corrective action for a fluid overflow condition from the main housing breather at startup in cold ambient temperatures at or below +5F (-15C).
167-B1415-12
Mar 28, 2014
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB-14-003 The following is to inform you of the revision of the inspection procedure for the DTC?s P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to us
167-B1307-12
Jul 23, 2013
103300 POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)
13-008 Design Change of the Idler Gear Case and Idler Gear Bolt. Abnormal load such as a stuck supply pump was applied to gear train then causing the bolt to loosen. Therefore, an enhancement to the case and bolt were carried out. The idle
SB-10-003
Oct 27, 2010
350000 EQUIPMENT
This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel filter.
SB-10-003
Oct 27, 2010
070000 FUEL SYSTEM, GASOLINE
This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel filter.
SB-10-003
Oct 27, 2010
350000 EQUIPMENT
This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel filter.
SB-10-003
Oct 27, 2010
070000 FUEL SYSTEM, GASOLINE
This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel filter.
LT-0010
Jun 1, 2009
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Hino Quick Reference Guide 2005-2010 Model Years
SB-09-002
Feb 24, 2009
060000 ENGINE (PWS)
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary.
SB-09-002
Feb 24, 2009
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary.
SB-09-002
Feb 24, 2009
350000 EQUIPMENT
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary.
SB-09-002
Feb 24, 2009
063130 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE)
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary.
SB-09-002
Feb 24, 2009
060000 ENGINE (PWS)
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary.
167-B0803-12
Dec 5, 2008
203000 WHEELS:LUGS/NUTS/BOLTS/STUDS
SB - 08 - 005 This document is to inform dealers and workshops of the design change to the hood damper, support bolt and the addition of a support collar.
167-P0805-12
Apr 12, 2008
200000 WHEELS
PTB 08-08 2005-2008 Quick Reference Guide Correction to Page 60
167-P0805-12
Apr 12, 2008
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
PTB 08-08 2005-2008 Quick Reference Guide Correction to Page 60
167-P0802-12
Mar 10, 2008
021240 SUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY
PTB 03-08 Spring Assemblies.
167-P0802-12
Mar 10, 2008
356000 EQUIPMENT ADAPTIVE/MOBILITY
PTB 03-08 Spring Assemblies.
167-P0803-12
Mar 5, 2008
060000 ENGINE (PWS)
PTB 01-08 Complete Engine Assembly Part Numbers
167-T0707-12
Oct 9, 2007
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
07 - 008 DX REPORT ? EXPORTING, SAVING AND PRINTING FROM PAST WORK INFORMATION
167-P0702-12
Oct 4, 2007
072100 FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Revised Warranty Process ? Denso Fuel Pumps & Injector Nozzles Exchange Denso Fuel Pumps & Injector Nozzles. Effective immediately, fuel pumps and injector nozzles replaced under warranty are to be purchased from the Memphis PDC. It is no
167-T0706-12
Jun 28, 2007
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
07 - 006 VOLTAGE DROP TEST
167-P0701-12
Jun 20, 2007
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
Introduction of Exchange Turbocharger Program. Hino Trucks is pleased to announce the introduction of the Turbocharger Exchange Program for its 2005 ? 2008 Model Year trucks. Effective June 21, 2007, the following turbocharger part numbers
167-T0705-12
Jun 20, 2007
125100 EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
07 - 005 No Throttle Response (brake light switch)
167-T0704-12
May 25, 2007
200000 WHEELS
07 - 004 ABS Wheel Sensor (active fault 3-1 thru 3-4)
167-T0703-12
May 18, 2007
210000 TRAILER HITCHES
07 - 003 ELECTRIC TRAILER BRAKE CONTROLLER APPLICATION
167-B0702-12
Apr 24, 2007
356000 EQUIPMENT ADAPTIVE/MOBILITY
SB - 07 - 005 The document is to inform the dealers about the change in material and tightening torque of the rocker arm support bolts and camshaft bearing cap bolts.
167-B0702-12
Apr 24, 2007
021600 SUSPENSION:FRONT:WHEEL BEARING
SB - 07 - 005 The document is to inform the dealers about the change in material and tightening torque of the rocker arm support bolts and camshaft bearing cap bolts.
167-T0708-12
Feb 15, 2007
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
06 - 012 SPEEDOMETER PULSE ADAPTER CONVERSION FORM
SB-07-003
Feb 12, 2007
350000 EQUIPMENT
This bulletin provides technical information on the redesigned axle breather that replaced the old (current) axle breather P/N A1199P1394.
07-001
Feb 10, 2007
021600 SUSPENSION:FRONT:WHEEL BEARING
This Tech Tip provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
07-001
Feb 10, 2007
200000 WHEELS
This Tech Tip provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
07-001
Feb 10, 2007
350000 EQUIPMENT
This Tech Tip provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
SB-07-002
Feb 10, 2007
010000 STEERING
This bulletin provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
SB-07-002
Feb 10, 2007
021600 SUSPENSION:FRONT:WHEEL BEARING
This bulletin provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
SB-07-002
Feb 10, 2007
350000 EQUIPMENT
This bulletin provides information concerning the updated torque specification found in the Hino Workshop Manual regarding the Arvin Meritor front non-drive steer axles MFS-06 and MFS-08
167-P0703-12
Jan 9, 2007
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
TB-001-07 Hino uses both Davco and Racor fuel/water separators on its vehicles. To determine the correct filter you must know which one is on the vehicle. The Davco is shown on the left. The Racor is shown on the right and has a primer butt
167-P0704-12
Jan 1, 2007
356000 EQUIPMENT ADAPTIVE/MOBILITY
TB-04-07 An engineering change in connecting rods was made from a stud with nuts to fasten the cap, to a bolt only to fasten the cap. The connecting rods with the stud and nuts are no longer available. The two different styles are intercha
06-011
Dec 27, 2006
090000 FUEL SYSTEM, OTHER
Fuel diluting engine oil
167-T0605-12
Dec 27, 2006
090000 FUEL SYSTEM, OTHER
06 - 010 LOW POWER (fuel restriction)
167-T0606-12
Dec 27, 2006
092100 FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP
06-011 HIGH PRESSURE FUEL PUMP FRONT SEAL FAILURE
06-011
Dec 27, 2006
350000 EQUIPMENT
Fuel diluting engine oil
06-011
Dec 27, 2006
092100 FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP
Fuel diluting engine oil
167-T0603-12
Dec 21, 2006
350000 EQUIPMENT
06 - 008 ABS EXTENSION HARNESS No throttle response on 2007 air brake chassis with automatic transmissions when selector placed in drive. No cruise control on 2007 air brake chassis with manual transmissions.
167-B0602-12
Sep 18, 2006
061320 ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER
SB ? 06 - 002 Fuel Filter Usage. This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel fil
167-B0601-12
Jul 10, 2006
060000 ENGINE AND ENGINE COOLING
SB ? 06 - 001 DESIGN CHANGE OF ENGINE OIL COOLER HOUSING. The casting for the engine oil cooler housing has been revised to include 2 shallow machined grooves on both sides of the engine oil cooler housing. These grooves aid in the retentio
167-B0508-12
Sep 28, 2005
106000 POWER TRAIN:AXLE ASSEMBLY
SB - 05 - 005 PROPER MAINTENANCE PROCEDURES FOR GREASE LUBRICATED FRONT AXLES
167-B0509-12
Sep 28, 2005
103000 POWER TRAIN:AUTOMATIC TRANSMISSION
SB ? 05 - 006 Upon removal of a transmission assembly from the vehicle, inspection is required to confirm the presence and correct installation of the two dowel pins in the rear engine housing. In some rare cases one or both dowel pins may
167-B0508-12
Sep 28, 2005
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
SB - 05 - 005 PROPER MAINTENANCE PROCEDURES FOR GREASE LUBRICATED FRONT AXLES
167-B0504-12
Sep 27, 2005
063000 ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
SB - 05 - 003 This document is to inform dealers and workshops on procedures to activate exhaust brake operation.
HINO NA6J - All Years Overview
Complete safety history for the HINO NA6J across all model years (2005, 2013).
24
Total Recalls
1
Total Complaints
0
Investigations
0
Reported Crashes
0
Reported Fires
0
Reported Deaths