WHEELS:LUGS/NUTS/BOLTS/STUDS
BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened.
Remedy: BMW will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall began on May 7, 2015. Owners may contact BMW customer service at 1-800-525-7417.
43,426 vehicles affected
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
BMW of North America, LLC (BMW) is recalling certain model year 2005-2011 model year R-model motorcycles, model year 2005-2012 K-model motorcycles, model year 2010-2011 S 1000 model motorcycles, and model year 2006-2010 HP2 motorcycles. In the affected motorcycles, the fuel pump flange (and the auxiliary fuel pump flange if equipped) could develop cracks and leak fuel.
Remedy: BMW will notify owners, and dealers will either reinforce the fuel pump flange or replace the pump, as necessary, free of charge. The recall began on April 16, 2014. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at
[email protected].
50,184 vehicles affected
SERVICE BRAKES, HYDRAULIC
BMW IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2009 R 1200 AND K 1200 SERIES MOTORCYCLES MANUFACTURED FROM AUGUST 2006 THROUGH MAY 2009. DUE TO THE CURRENT ROUTING OF THE FRONT BRAKE LINES, IT IS POSSIBLE THAT DURING RIDING, AND THEREFORE ASSOCIATED VIBRATION. THE BRAKE LINES COULD BE UNDER STRAIN. IF THE VIBRATION/STRAIN IS SIGNIFICANT, THE BRAKE LINE COULD SPLIT AND START TO DEVELOP A LEAK.
Remedy: BMW WILL NOTIFY OWNERS AND DEALERS WILL INSTALL NEW BRAKE LINES, CONTAINING A "SLEEVE" ALONG A PORTION OF THE LINES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 20, 2010. OWNERS MAY CONTACT BMW AT 1-800-525-7417.
15,532 vehicles affected
THE FUEL PUMP ON MY R 1200 ST MOTORCYCLE IS MOUNTED INSIDE THE FUEL TANK AND PROVIDES FUEL UNDER PRESSURE TO THE PRESSURE REGULATOR. FUEL EXITS THE TANK THROUGH A QUICK DISCONNECT FITTING SCREWED INTO THE PLATE ON WHICH THE FUEL PUMP IS MOUNTED. DURING A ROUTINE INSPECTION I NOTICED CRACKS AROUND THE THREADED HOLE THAT THE QUICK DISCONNECT FITTING SCREWS INTO. BOTH THE QUICK DISCONNECT FITTING AND THE PLATE WITH THE THREADED HOLE ARE PLASTIC. IF THE CRACKS CONTINUE TO GROW, FUEL UNDER PRESSURE WILL LEAK ONTO MYSELF AND HOT ENGINE PARTS, CAUSING SIGNIFICANT DAMAGE AND INJURY. THE PARTS IN QUESTION ARE USED ON NUMEROUS OTHER BMW MOTORCYCLE MODELS, INCLUDING THE OTHER R 1200 MODELS, K 1200 MODELS, AND K 1300 MODELS.
REAR BRAKE DRAG - MY 2007 BMW R1200ST MOTORCYCLE HAD THE REAR BRAKE PADS REPLACED AT THE 18,000 MILE SERVICE. THE FRONT PADS STILL HAVE WELL OVER 50% MATERIAL REMAINING. I WAS CONCERNED ABOUT THE PREMATURE WEAR ON THE REAR PADS, SO I TOOK MY MOTORCYCLE FOR A SHORT RIDE (LESS THAN 5 MILES). UPON RETURNING, THE FRONT BRAKE DISKS AND CALIPERS WERE COOL, BUT THE REAR DISK AND CALIPER WERE BOTH TOO HOT TO TOUCH. IN ADDITION TO WASTING FUEL, THE DRAGGING REAR BRAKE COULD LEAD TO A FIRE IF ANY COMBUSTIBLE MATERIALS WERE PRESENT. A REVIEW OF ON-LINE BMW MOTORCYCLE FORUMS REVEALS THAT SEVERAL OTHER INDIVIDUALS HAVE COMPLAINED ABOUT PREMATURE REAR BRAKE PAD WEAR AND EXCESSIVE DISK AND CALIPER TEMPERATURES. *TR