2020 ALTEC AERIAL DEVICE

25 recalls, 0 complaints - 106 TSBs

25V562000 Aug 29, 2025
STRUCTURE:FRAME AND MEMBERS
Defect Description
Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.
Consequence
A cable step that fails during use increases the risk of injury.
Remedy
Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners ma... Read more
903 vehicles affected
Manufacturer: Altec Industries, Inc.
24V362000 May 23, 2024
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2020-2024 Altec LR7 and LR8 aerial devices. The hydraulic cylinder feeder tube routed near the cylinder rest bracket may become damaged and leak oil, which can result in uncontrolled boom movement.
Consequence
Uncontrolled movement of the boom can increase the risk of injury.
Remedy
Altec will replace the cylinder rest pad and the feeder tube if necessary, free of charge. Owner notification letters are expected to be mailed July 22, 2024. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3142.
1,128 vehicles affected
Manufacturer: Altec Industries, Inc.
24V015000 Jan 11, 2024
ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2004-2023 AT Series aerial devices. The cables in the engine compartment may contact the vehicle's hood, damaging the cables and causing a short circuit.
Consequence
A short circuit increases the risk of a fire.
Remedy
Altec will inspect and relocate the cables and fuse blocks, free of charge. Owner notification letters are expected to be mailed March 8, 2024. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3142.
437 vehicles affected
Manufacturer: Altec Industries, Inc.
23V438000 Jun 22, 2023
ELECTRICAL SYSTEM
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2019-2022 AT335 vehicles. An inverter-powered outlet may have been installed at the aerial boom tip without ground-fault interrupter (GFCI) protection.
Consequence
An outlet without GFCI protection may fail to shut off electrical power when a ground-fault occurs, increasing the risk of injury or fire.
Remedy
Dealers will inspect and install a GFCI outlet as necessary, free of charge. Owner notification letters are expected to be mailed August 25, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3091.
18 vehicles affected
Manufacturer: Altec Industries, Inc.
23V395000 Jun 1, 2023
FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2020-2023 D4000B, D2000B, and AC18 trucks. The collision mitigation system software may not be calibrated correctly, prohibiting the active braking system from activating.
Consequence
An active braking system that fails to activate as intended increases the risk of a crash.
Remedy
Owners will be notified to take their vehicles to their respective OEM service center for a software update and road-test, free of charge. Owner notification letters are expected to be mailed July 28, 2023. Owners may contact Altec's customer service at 1-877-468-5832. Altec's number for this rec... Read more
59 vehicles affected
Manufacturer: Altec Industries, Inc.
23V216000 Mar 30, 2023
STRUCTURE:BODY
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2016-2022 DM, DH, DC, DL, D2000, D3000, and D4000 series digger derricks, and AM55 aerial devices. The base of the rear pole rack may be missing a weld.
Consequence
A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
Remedy
Altec will inspect the rear pole rack mounting plate, and if necessary, replace any required welds, free of charge. Owner notification letters are expected to be mailed May 26, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3064.
1,967 vehicles affected
Manufacturer: Altec Industries, Inc.
22V794000 Oct 21, 2022
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2019-2022 AT41ME aerial devices. The material handling interlocking valve may lose power when the outriggers are not set, allowing the jib winch to be operated while the outriggers are up.
Consequence
Outriggers that are not set when loads are being lifted by the jib winch may cause the unit to tip, increasing the risk of injury.
Remedy
Altec will install a visual indication system to show when the outriggers are set or not set, and provide a new pre-operational inspection placard, free of charge. Owner notification letters are expected to be mailed December 16, 2022. Owners may contact Altec's customer service at 1-877-462-5832.... Read more
71 vehicles affected
Manufacturer: Altec Industries, Inc.
22V613000 Aug 10, 2022
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2015-2022 DT65 and DT85 Aerial Devices. The weld between the base boom and the auger stow bracket could crack.
Consequence
A cracked weld may allow the auger bracket to detach from the boom, increasing the risk of injury.
Remedy
Altec will inspect and repair cracks found in the base boom, free of charge. Owner notification letters were mailed October 7, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN-3017.
975 vehicles affected
Manufacturer: Altec Industries, Inc.
22V577000 Aug 4, 2022
ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 Altec AT200A, AT235, AT235P, AT237, AT37G, AT40G, AT41M, and CB5-132D-S aerial devices. A wire to the boom stow sensor may be routed over a sharp edge, which can expose the wire to metal and result in a blown ignition circuit fuse.
Consequence
A blown fuse can cause an engine stall, increasing the risk of a crash.
Remedy
Altec will install a relay, free of charge. Owner notification letters are expected to be mailed September 30, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3015.
594 vehicles affected
Manufacturer: Altec Industries, Inc.
22V147000 Mar 11, 2022
FUEL SYSTEM, DIESEL:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2016-2021 AT and TA aerial devices. The chassis fuel line clamps may not have been secured properly after they were removed to install an aftermarket accessory.
Consequence
Unsecured fuel lines may become damaged and leak fuel, increasing the risk of a fire.
Remedy
Altec will provide work instructions and a kit to properly secure the fuel line, and repair any damaged fuel line if necessary, free of charge. Owner notification letters were mailed on May 6, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is C... Read more
27,270 vehicles affected
Manufacturer: Altec Industries, Inc.
22V146000 Mar 11, 2022
EQUIPMENT
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 SK185-MP, and SKC landscaping spray vans. The vehicles are not equipped with carbon monoxide detectors.
Consequence
Elevated levels of carbon monoxide gas may not be detected, increasing the risk of injury.
Remedy
Altec will install a carbon monoxide detector and safety alert placard, free of charge. Owner notification letters were mailed on May 6, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 864.
46 vehicles affected
Manufacturer: Altec Industries, Inc.
22V072000 Feb 9, 2022
STRUCTURE:CRITICAL FASTENERS
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2019-2021 ATTXX-M/P/S aerial devices. Bolts in the rotation bearing outer-race may have been over-tightened, allowing the bolts to break.
Consequence
Broken bolts can cause separation of the pedestal and turntable, increasing the risk of injury.
Remedy
Altec will replace the outer-race rotation bolts, free of charge. Owner notification were mailed on March 25, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 849.
454 vehicles affected
Manufacturer: Altec Industries, Inc.
22V071000 Feb 9, 2022
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2018-2021 DC and DM Series Digger Derricks and AM series Aerial Devices. The unit subbase may develop cracks in the bulkhead plate, which can cause the shear plates to fail.
Consequence
Shear plate failure can result in the separation of the subbase and truck frame, increasing the risk of injury.
Remedy
Altec will inspect the bulkhead plate, and add a reinforcement plate, free of charge. Owner notification letters were mailed on April 8, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 851.
167 vehicles affected
Manufacturer: Altec Industries, Inc.
22V058000 Feb 3, 2022
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:TURNTABLE
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 LS60 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.
Consequence
Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.
Remedy
Altec will inspect the outer rotation bolt washers and repair the pedestal as necessary, free of charge. Owner notification letters were mailed on April 4, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 846.
157 vehicles affected
Manufacturer: Altec Industries, Inc.
21V998000 Dec 20, 2021
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:MOTOR/HYDRAULIC PUMP
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 AN67-E100, AA67-E100, AN67, AA67, and AN55-E88 aerial devices. The hydraulic plumbing to the lift cylinders of the lower and upper booms could be connected incorrectly, allowing the boom to overextend.
Consequence
The operator could overextend the boom while using the material handling jib, causing the aerial device to tip over and increasing the risk of injury.
Remedy
Altec will inspect and correct the plumbing as necessary, free of charge. Owner notification letters are expected to be mailed February 18, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 842.
150 vehicles affected
Manufacturer: Altec Industries, Inc.
21V722000 Sep 16, 2021
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:TURNTABLE
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2016-2021 LS87 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.
Consequence
Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.
Remedy
Altec will inspect the outer rotation bolt washers and repair the pedestal as necessary, free of charge. Owner notification letters were mailed on November 15, 2021. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 833.
94 vehicles affected
Manufacturer: Altec Industries, Inc.
21V464000 Jun 18, 2021
EQUIPMENT
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2020-2021 AT200A, AT235, AT235P Aerial Devices. Bolts of insufficient strength may have been used to connect the pedestal and sub-base, which could cause the bolts to become overloaded.
Consequence
Overloaded bolts can fail, causing the pedestal to separate and increasing the risk of injury or death.
Remedy
Altec will issue remedy instructions to owners, to inspect the bolts, and replace any grade 5 bolts with grade 8 bolts, free of charge. Owner notification letters were mailed on July 22, 2021. Owners may contact Altec customer service at 1-800-462-5832. Altec's number for this recall is CSN 825.
218 vehicles affected
Manufacturer: Altec Industries, Inc.
21V409000 Jun 1, 2021
EQUIPMENT
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2005-2021 A65, A70, A75, A72-T, A77-T, and A82-T vehicles. The lower and upper boom raise spools can shift after releasing the joystick or control interlock.
Consequence
Unintended movement of the lower and upper booms increases the risk of injury.
Remedy
Altec will install a jumper hose and check valve into the boomtip tank lines and replace the overcenter blocking cartridge with an internally referenced drain path, free of charge. Owner notification letters were mailed on July 28, 2021. Owners may contact Altec customer service at 1-877-462-5832.... Read more
1,977 vehicles affected
Manufacturer: Altec Industries, Inc.
21V012000 Jan 15, 2021
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2016-2020 DH-B Series, DH-E Series, and D3000-E digger derricks set up for combined use and equipped with radio remote upper controls. These units only have the derrick use capacity chart and do not have the combined use capacity chart.
Consequence
The operator may not have access to the rated capacity information while they are operating the equipment in combined use, increasing the risk of an injury.
Remedy
Altec will notify owners, and will require them to attach a capacity placard to the radio remote using a lanyard if it is missing, free of charge. The recall began on March 16, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 792.
213 vehicles affected
Manufacturer: Altec Industries, Inc.
20V777000 Dec 11, 2020
EQUIPMENT
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2020 AN67-E100 articulating non-overcenter aerial device vehicles. The boom valve has a shuttle cartridge installed instead of a plug.
Consequence
The valve not having a plug could result in unintended boom movement, increasing the risk of an injury.
Remedy
Altec will notify owners and Parker Hannifan Corporation will provide a replacement plug, free of charge. The recall began February 8, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 789.
183 vehicles affected
Manufacturer: Altec Industries, Inc.
20V765000 Dec 10, 2020
EQUIPMENT
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2018-2020 AA, AM, AN, A-Class, TA, DM, DL, DXXXX, DC, and DT digger derricks and aerial device vehicles equipped with a DC pump. A hydraulic check valve can have a snap ring failure resulting in the snap ring becoming lodged in a counterbalance or... Read more
Consequence
Unintended boom movement may result in potential injury and or property damage.
Remedy
Altec will notify owners, and dealers will replace the valve's snap ring, free of charge. The recall began February 9, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 787.
4,987 vehicles affected
Manufacturer: Altec Industries, Inc.
20V587000 Sep 24, 2020
EQUIPMENT
Defect Description
Altec Industries Inc. (Altec) is recalling certain 2019-2020 AA55, AM50, A77-T Aerial Devices and D2/3/4B, D3E, DHB, DHH and DHE Digger Derricks. The bolts that secure the pedestal to the turntable (with head marking 5252) may fail.
Consequence
If the fasteners break, the pedestal may separate from the turntable, increasing the risk of injury or death.
Remedy
Altec will notify owners, and dealers will provide replacement fasteners if necessary, free of charge. This recall began October 29, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 778.
280 vehicles affected
Manufacturer: Altec Industries Inc.
20V401000 Jul 10, 2020
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
Defect Description
Altec Industries, Inc. (Altec) is recalling certain 2017-2020 AT200A, AT235, AT37-G, AT40-G, AT41/48M Aerial Devices mounted on a Ford F-350, F-450 or F-550 chassis equipped with a gas engine and Chelsea 249 Power Take-Off (PTO). The PTO may leak oil onto the exhaust heat shield thermal blanket.
Consequence
Oil absorbed by the exhaust heat shield thermal blanket has an increased risk of a fire from being exposed to hot engine components.
Remedy
Altec will notify owners, and dealers will inspect and replace the heat shield with a redesigned version, as well as install plumbing to relocate a pressure switch and install hoses with improved routing to increase their distance from heat sources, free of charge. The recall began September 8, 202... Read more
2,550 vehicles affected
Manufacturer: Altec Industries Inc.
20V301000 May 26, 2020
TRAILER HITCHES
Defect Description
Altec Industries Inc. (Altec) is recalling certain 2014-2020 Aerial Devices and body only units equipped with Class 3 towing hitches. The tow hitch may have incorrect load rating markings, and may have been damaged by unintentional overloading.
Consequence
If the tow hitch is overloaded, the hitch may fail, increasing the risk of a crash.
Remedy
Altec will notify owners and provide instructions for inspecting the bumper and receiver tube for damage and repairing as necessary and installing the proper hitch load rating placards on the unit. This recall began July 24, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec... Read more
396 vehicles affected
Manufacturer: Altec Industries Inc.
20V282000 May 19, 2020
EQUIPMENT
Defect Description
Altec Industries Inc. (Altec) is recalling certain 2018-2020 AA55, AM50 and A77 Aerial Devices and D2, D3, D4, DH-B and DH-H Digger Derricks. The bolts that secure the pedestal to the turntable (with head marking 5185) may fail.
Consequence
If the fasteners break, the pedestal may separate from turntable, increasing the risk of injury or death.
Remedy
Altec will notify owners and will provide replacement fasteners if necessary, free of charge. This recall began July 2, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 760.
157 vehicles affected
Manufacturer: Altec Industries Inc.

No complaints found for this vehicle.

Technical Service Bulletins, 2020 ALTEC AERIAL DEVICE

106 manufacturer communications from 61 unique bulletins. TSBs describe known problems and recommended fixes from the manufacturer.

Most Affected Components

ComponentBulletins
350000 EQUIPMENT37
110000 ELECTRICAL SYSTEM10
100000 POWER TRAIN6
160000 STRUCTURE5
060000 ENGINE AND ENGINE COOLING5
980000 UNKNOWN OR OTHER5
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL4
200000 WHEELS4
SIL 3123 Dec 7, 2023
350000 EQUIPMENT
Altec has learned that Section 9 of the Maintenance and Parts Manual for Certain AC45E cranes built from September 2020 to November 2023 contains an incorrect torque value of 250 foot-pounds (339 Na??m) for the rotation gearbox mounting cap
SIL 3065 Nov 28, 2023
350000 EQUIPMENT
Altec has learned that the pressure plates in the reel motor were not manufactured to specification, causing the plates to stick together. This can cause the reel park brake to not fully release, or cause the reel motor to lock up on certai
SIL 3099 Oct 31, 2023
020000 SUSPENSION
Altec has learned that on certain Altec units equipped with air suspension built from April 2020 to June 2023, some operators may be dumping the chassis airbags before deploying the outriggers. This can cause the airbags to become damaged.
SIL 3099 Oct 31, 2023
140000 AIR BAGS
Altec has learned that on certain Altec units equipped with air suspension built from April 2020 to June 2023, some operators may be dumping the chassis airbags before deploying the outriggers. This can cause the airbags to become damaged.
SIL 3099 Oct 31, 2023
350000 EQUIPMENT
Altec has learned that on certain Altec units equipped with air suspension built from April 2020 to June 2023, some operators may be dumping the chassis airbags before deploying the outriggers. This can cause the airbags to become damaged.
SIL 3110 Sep 27, 2023
350000 EQUIPMENT
Altec learned that a connection in the upper controls joystick in certain OEM Controls on AT238P aerial devices built from November 2020 to August 2022 can fail due to wire movement during use and issued SIL-845 to re-manufacture controller
SIL 3066 Sep 22, 2023
110000 ELECTRICAL SYSTEM
Altec has learned that operators might be using the crane and unit simultaneously on certain Altec units equipped with Venturo, Liftmoore, and Autocrane service cranes built from March 2009 to August 2022. These units were designed for sing
SIL 3066 Sep 22, 2023
980000 UNKNOWN OR OTHER
Altec has learned that operators might be using the crane and unit simultaneously on certain Altec units equipped with Venturo, Liftmoore, and Autocrane service cranes built from March 2009 to August 2022. These units were designed for sing
CSR 3109 Aug 22, 2023
060000 ENGINE AND ENGINE COOLING
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. Certain 2020 to 2022
CSR 3109 Aug 22, 2023
100000 POWER TRAIN
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. Certain 2020 to 2022
CSR 3109 Aug 22, 2023
110000 ELECTRICAL SYSTEM
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. Certain 2020 to 2022
CSR 3109 Aug 22, 2023
350000 EQUIPMENT
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. Certain 2020 to 2022
CSR 3093 Jul 11, 2023
110000 ELECTRICAL SYSTEM
Altec Industries, Inc. has received notification from Navistar, Inc. that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. Navistar has decided tha
CSR 3093 Jul 11, 2023
350000 EQUIPMENT
Altec Industries, Inc. has received notification from Navistar, Inc. that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. Navistar has decided tha
CSR 3093 Jul 11, 2023
030000 BRAKES (PWS)
Altec Industries, Inc. has received notification from Navistar, Inc. that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. Navistar has decided tha
SIL 3082 Jul 5, 2023
350000 EQUIPMENT
Altec has learned that Section 8 of the Maintenance Manual for certain Altec LS60 aerial devices built from November 2017 to January 2023 contains an incorrect torque value of 325 foot-pounds for the rotation gearbox mounting cap screws. Al
CSR-3092 Jun 28, 2023
130000 VISIBILITY
Altec Industries, Inc. has received notification from Daimler Truck North America LLC (DTNA), on behalf of its Freightliner Truck Division, that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you
SIL 3068 Jun 28, 2023
350000 EQUIPMENT
Altec has learned that certain digger derricks and aerial devices of various models built from January 2010 to January 2023 may contain access steps with a handrail and side plate that come together in a small space causing a potential pinc
CSR 3083 Jun 14, 2023
010000 STEERING
Altec Industries, Inc. has received notification from Daimler Truck North America that a condition exists relating to motor vehicle safety, compliance, or emissions in certain 2019 through 2021 model year Freightliner 108SD, 114SD, 122SD, B
SIL 3021 Apr 14, 2023
350000 EQUIPMENT
The rear out and down outriggers on certain LS60 aerial devices built from July 2018 to April 2022 might contain a dual bonded hose with an externally attached electrical cable in the horizontal leg to operate the hydraulic cylinder and pro
CSR3063 Apr 4, 2023
110000 ELECTRICAL SYSTEM
Altec Industries, Inc. has received notification from Warn Industries, Inc. that a bumper winch supplied on certain Altec units could contain a defect related to motor vehicle safety. Certain Altec units built from December 2020 to Septembe
CSR3063 Apr 4, 2023
350000 EQUIPMENT
Altec Industries, Inc. has received notification from Warn Industries, Inc. that a bumper winch supplied on certain Altec units could contain a defect related to motor vehicle safety. Certain Altec units built from December 2020 to Septembe
SIL 3037 Jan 17, 2023
350000 EQUIPMENT
Altec has learned that the Stability Test Form in the Maintenance Manuals for LS49 aerial devices built from July 2019 to July 2022 contains incorrect test weight information. This information has been corrected in the currently published M
SIL 3037 Jan 17, 2023
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Altec has learned that the Stability Test Form in the Maintenance Manuals for LS49 aerial devices built from July 2019 to July 2022 contains incorrect test weight information. This information has been corrected in the currently published M
CSR 3043 Jan 10, 2023
030000 SERVICE BRAKES, HYDRAULIC
Altec Industries, Inc. has received notification from Fiat Chrysler Automobiles that a condition exists relating to motor vehicle safety, compliance, or emissions in vehicles that are equipped with Altec equipment. Certain 2019 and 2020 mod
SIL 3035 Dec 30, 2022
070000 FUEL SYSTEM, GASOLINE
Owners of certain AT series and TA40/45 series aerial devices built on Dodge Ram 4500/5500 chassis from 2016 to 2022 received Altec Product Notice CSN 855 in May of 2022 calling for the inspection of fuel line securement. We have identified
SIL 3035 Dec 30, 2022
350000 EQUIPMENT
Owners of certain AT series and TA40/45 series aerial devices built on Dodge Ram 4500/5500 chassis from 2016 to 2022 received Altec Product Notice CSN 855 in May of 2022 calling for the inspection of fuel line securement. We have identified
CSR-525 Nov 18, 2022
160000 STRUCTURE
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists. This condition relates to the operation or customer satisfaction of the unit when equipped with an Altec aerial device or equipment. Ford has
CSR-525 Nov 18, 2022
350000 EQUIPMENT
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists. This condition relates to the operation or customer satisfaction of the unit when equipped with an Altec aerial device or equipment. Ford has
SIL-859 Nov 15, 2022
350000 EQUIPMENT
Altec has learned that on AH75/85/100, AH75A/85A/100A, and HL125 aerial devices built from November 2003 to January 2021, there is potential for the jib rotational positioning pin to disengage when the platform is tilted down 90 degrees or
CSR-3032 Nov 9, 2022
350000 EQUIPMENT
Altec Industries, Inc. has received notification from General Motors (GM) that for certain 2019 to 2022 Chevrolet Silverado 4500HD, 5500HD, and 6500HD vehicles the power take-off (PTO) will kick out and/or disengages intermittently. This co
PA713 Oct 5, 2022
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Product advisory posted on our web site to inform owners, user, & operators that the new ANSI A92.2-2021 standard has taken effect and they must review. The standard has changed some of the responsibilities of the parties who use or operat
SIL-857 Aug 31, 2022
160000 STRUCTURE
Certain 2020 through 2021 model year F-550 vehicles equipped with a Payload Plus Upgrade Package and a 19,500 lbs. GVWR were ordered from Ford with a frame rail specification that does not meet the original equipment manufacturer (OEM) spec
CSR-541 Jul 1, 2022
130000 VISIBILITY
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. The windshield wiper
CSR-541 Jul 1, 2022
980000 UNKNOWN OR OTHER
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. The windshield wiper
SIL 856 Jun 22, 2022
350000 EQUIPMENT
Altec has learned of the potential for washers on the outer race rotation bearing cap screws to overlap the adjacent weld on AT238P and AT335 aerial devices built from October 2019 to November 2021. While there have been no reports of unit
CSR 540 Jun 13, 2022
100000 POWER TRAIN
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment
SIL 850 May 3, 2022
110000 ELECTRICAL SYSTEM
The body compartment wiring on certain Altec aerial devices, digger derricks, and body-only units built from 2014 to 2021 contains an in-line fuse located close to the lighting in the compartment, while other units are fused upstream, close
SIL 852 Apr 27, 2022
350000 EQUIPMENT
Altec has learned that the electrohydraulic outrigger/tools control valve on AA755L and A-series aerial devices and DLB, DMB, and D2/3/4000B series digger derricks could have the potential to produce a very small amount of flow into the low
SIL 845 Apr 20, 2022
110000 ELECTRICAL SYSTEM
Altec has learned that a connection in the upper controls joystick on AT238P aerial devices built from November 2020 to September 2021 can fail due to wire movement during use. If this happens with the boom elevated, the operator in the pla
SIL 845 Apr 20, 2022
350000 EQUIPMENT
Altec has learned that a connection in the upper controls joystick on AT238P aerial devices built from November 2020 to September 2021 can fail due to wire movement during use. If this happens with the boom elevated, the operator in the pla
SIL 845 Apr 20, 2022
980000 UNKNOWN OR OTHER
Altec has learned that a connection in the upper controls joystick on AT238P aerial devices built from November 2020 to September 2021 can fail due to wire movement during use. If this happens with the boom elevated, the operator in the pla
CSR 536 Apr 1, 2022
130000 VISIBILITY
Altec Industries, Inc. has received notification from Fiat Chrysler Automobiles (FCA) that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. FCA US
CSR 536 Apr 1, 2022
350000 EQUIPMENT
Altec Industries, Inc. has received notification from Fiat Chrysler Automobiles (FCA) that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. FCA US
CSR 537 Apr 1, 2022
010000 STEERING
Altec Industries, Inc. has received notification from Ford Motor Company that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. Ford Motor Company
CSR 532 Mar 18, 2022
050000 PARKING BRAKE
Altec Industries, Inc. has received notification from Navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. On certain trucks equipped
CSR 532 Mar 18, 2022
060000 ENGINE AND ENGINE COOLING
Altec Industries, Inc. has received notification from Navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. On certain trucks equipped
CSR 532 Mar 18, 2022
100000 POWER TRAIN
Altec Industries, Inc. has received notification from Navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. On certain trucks equipped
CSR 531 Mar 18, 2022
050000 PARKING BRAKE
Altec Industries, Inc. has received notification from Navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. On certain trucks equipped
CSR 531 Mar 18, 2022
060000 ENGINE AND ENGINE COOLING
Altec Industries, Inc. has received notification from Navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. On certain trucks equipped
CSR 531 Mar 18, 2022
100000 POWER TRAIN
Altec Industries, Inc. has received notification from Navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. On certain trucks equipped
CSR 531 Mar 18, 2022
110000 ELECTRICAL SYSTEM
Altec Industries, Inc. has received notification from Navistar that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment. On certain trucks equipped
CSR 528 Feb 25, 2022
060000 ENGINE AND ENGINE COOLING
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment
CSR 528 Feb 25, 2022
070000 FUEL SYSTEM, GASOLINE
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment
CSR 528 Feb 25, 2022
080000 FUEL SYSTEM, DIESEL
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists relating to motor vehicle safety, compliance, or emissions in a vehicle you possess that is equipped with Altec equipment
SIL 844 Feb 7, 2022
350000 EQUIPMENT
Altec has learned that there could be loose, missing, or incorrectly installed mounting fasteners on the electric power take-off (ePTO) on certain aerial devices built from 2015 to 2020 and equipped with a JEMS 18E20 hybrid system. This can
CSR 529 Feb 3, 2022
020000 SUSPENSION
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists. This condition relates to the operation or customer satisfaction of the unit when equipped with an Altec aerial device o
CSR 529 Feb 3, 2022
100000 POWER TRAIN
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists. This condition relates to the operation or customer satisfaction of the unit when equipped with an Altec aerial device o
CSR 529 Feb 3, 2022
105000 POWER TRAIN:DRIVELINE
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists. This condition relates to the operation or customer satisfaction of the unit when equipped with an Altec aerial device o
CSR 529 Feb 3, 2022
350000 EQUIPMENT
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that a condition exists. This condition relates to the operation or customer satisfaction of the unit when equipped with an Altec aerial device o
SIL 839 Nov 30, 2021
100000 POWER TRAIN
Some customers have reported the loss of functionality of the Altec unit or the EZ Trac system on certain 2016-2021 Ford F750 chassis with EZ Trac hydraulic all-wheel drive installed. The investigation has shown that improper wiring could h
SIL 839 Nov 30, 2021
200000 WHEELS
Some customers have reported the loss of functionality of the Altec unit or the EZ Trac system on certain 2016-2021 Ford F750 chassis with EZ Trac hydraulic all-wheel drive installed. The investigation has shown that improper wiring could h
SIL 839 Nov 30, 2021
350000 EQUIPMENT
Some customers have reported the loss of functionality of the Altec unit or the EZ Trac system on certain 2016-2021 Ford F750 chassis with EZ Trac hydraulic all-wheel drive installed. The investigation has shown that improper wiring could h
SIL 839 Nov 30, 2021
980000 UNKNOWN OR OTHER
Some customers have reported the loss of functionality of the Altec unit or the EZ Trac system on certain 2016-2021 Ford F750 chassis with EZ Trac hydraulic all-wheel drive installed. The investigation has shown that improper wiring could h
SIL 830 Nov 5, 2021
350000 EQUIPMENT
Some customers have reported hose carrier failure and/or cover damage occurring during the operation of LS60 aerial devices built from January 2017 to May 2020. Altec has developed an improved design of the hose carrier tray and cover syste
PUN 2021D Nov 3, 2021
110000 ELECTRICAL SYSTEM
Altec has learned that the labeling describing the proper jump starting procedure for certain vehicles equipped with a Jobsite Energy Management System (JEMS) 2, 4, 6, or 12 built by Altec from 2015 to 2021 has sometimes been overlooked. Fa
PUN 2021D Nov 3, 2021
350000 EQUIPMENT
Altec has learned that the labeling describing the proper jump starting procedure for certain vehicles equipped with a Jobsite Energy Management System (JEMS) 2, 4, 6, or 12 built by Altec from 2015 to 2021 has sometimes been overlooked. Fa
PUN 2021D Nov 3, 2021
355100 EQUIPMENT:OTHER:LABELS
Altec has learned that the labeling describing the proper jump starting procedure for certain vehicles equipped with a Jobsite Energy Management System (JEMS) 2, 4, 6, or 12 built by Altec from 2015 to 2021 has sometimes been overlooked. Fa
CSR 525 Oct 15, 2021
160000 STRUCTURE
Altec is notifying our customers with certain aerial devices that Ford has issued a customer satisfaction campaign for certain 2017 through 2020 model year F550 vehicles equipped with a Payload Plus Upgrade Package. Every affected unit is e
SIL 831 Sep 24, 2021
160000 STRUCTURE
Altec has discovered that certain AT200A aerial devices built from June 2020 to January 2021 could have square inside corners on a mounting frame side plate. The square corners can cause excessive stress levels in the side plate. Over time
SIL 831 Sep 24, 2021
350000 EQUIPMENT
Altec has discovered that certain AT200A aerial devices built from June 2020 to January 2021 could have square inside corners on a mounting frame side plate. The square corners can cause excessive stress levels in the side plate. Over time
CSR 521 Aug 31, 2021
200000 WHEELS
Fiat Chrysler Automobiles (FCA) US has decided that a defect that relates to motor vehicle safety exists on certain 2012 through 2020 model year (D2) Ram 3500 pickup, (DD) Ram 3500 cab chassis, and (DP) Ram 4500/5500 cab chassis vehicles.
SIL 822 Aug 25, 2021
350000 EQUIPMENT
Altec has learned that certain AT237 and AT248F aerial devices built from April 2017 through March 2020 might have insufficient slack in the hydraulic hoses at the riser between the lower and upper booms, which could lead to hoses rubbing o
SIL 819 Aug 13, 2021
020000 SUSPENSION
Certain 2017-2020 Ford F350/F450/F550 chassis with Timbren springs installed near the chassis front coil springs can loosen over time and could eventually become disconnected. Altec requires the Timbren springs to be inspected no later tha
SIL 819 Aug 13, 2021
350000 EQUIPMENT
Certain 2017-2020 Ford F350/F450/F550 chassis with Timbren springs installed near the chassis front coil springs can loosen over time and could eventually become disconnected. Altec requires the Timbren springs to be inspected no later tha
SIL 810 Aug 6, 2021
350000 EQUIPMENT
Chafing can occur on hoses at the rear of the turntable on certain LS60 aerial devices built from February 2018 to February 2021. Altec requires the hose routing to be inspected on the affected units no later than the next periodic maintena
SIL 798 Jul 28, 2021
350000 EQUIPMENT
On certain AT37/41/48 M/ME/P/PE/S/SE aerial devices built from June of 2015 to March of 2020 Altec requires the platform leveling bracket assembly to be inspected as described in the Inspection Procedure. If the inspection discovers any mi
SIL 798 Jul 28, 2021
354210 EQUIPMENT:MECHANICAL:INTEGRATED JACK/LEVELER/STABILIZER:CRITICAL FASTENERS
On certain AT37/41/48 M/ME/P/PE/S/SE aerial devices built from June of 2015 to March of 2020 Altec requires the platform leveling bracket assembly to be inspected as described in the Inspection Procedure. If the inspection discovers any mi
SIL 806 Jun 28, 2021
350000 EQUIPMENT
Altec has learned that certain Rear-mounted LR7 units built from May 2019 to April 2021 have reports of the platform ribs separating from the platform shell near the bottom of the platform. The separation can be caused by excessive bouncing
SIL 801 May 27, 2021
200000 WHEELS
Altec has learned that the fender rubber on certain units built from July 2020 to October 2020 can become detached from the wheel well fender cutout of the utility body. Altec recommends that all fender rubber be inspected using the inspec
SIL 801 May 27, 2021
350000 EQUIPMENT
Altec has learned that the fender rubber on certain units built from July 2020 to October 2020 can become detached from the wheel well fender cutout of the utility body. Altec recommends that all fender rubber be inspected using the inspec
SIL 805 May 24, 2021
350000 EQUIPMENT
Altec has learned that certain TS20-4P units built from 2019 to 2021 have fairlead rollers that do not consistently rotate freely. This operation can cause damage to the ropes. Altec requires that the levelwind fairleads be replaced within
SIL 805 May 24, 2021
355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
Altec has learned that certain TS20-4P units built from 2019 to 2021 have fairlead rollers that do not consistently rotate freely. This operation can cause damage to the ropes. Altec requires that the levelwind fairleads be replaced within
SIL 805 May 24, 2021
356000 EQUIPMENT ADAPTIVE/MOBILITY
Altec has learned that certain TS20-4P units built from 2019 to 2021 have fairlead rollers that do not consistently rotate freely. This operation can cause damage to the ropes. Altec requires that the levelwind fairleads be replaced within
CSR 514 Apr 26, 2021
180000 VEHICLE SPEED CONTROL
Altec Industries, Inc. has received notification from an Original Equipment Manufacturer (OEM) that certain 2020 RAM Chassis with adaptive cruise control have a condition relating to motor vehicle operation or customer satisfaction.
SIL 796 Apr 9, 2021
350000 EQUIPMENT
Altec has discovered that cracks might have formed in the yoke of the platform assembly on some AC40 cranes equipped with a personnel platform built between February 2014 and November 2020. Although the cracks do not compromise the structur
SIL 797 Apr 6, 2021
350000 EQUIPMENT
Certain LR7 aerial devices sold between September 2020 and November 2020 might have a trailer plug wiring configuration that was specified in the purchase order to supply a constant 12+ volts to pin 6. If you intend to pull a trailer that i
CRS 512 Mar 16, 2021
060000 ENGINE AND ENGINE COOLING
Cummins has launched a customer satisfaction campaign for certain Cummins B6.7 diesel engines produced between August 26, 2020 and October 5, 2020, that may have been installed. Some of the affected vehicles may contain engine valve spring
CRS 512 Mar 16, 2021
350000 EQUIPMENT
Cummins has launched a customer satisfaction campaign for certain Cummins B6.7 diesel engines produced between August 26, 2020 and October 5, 2020, that may have been installed. Some of the affected vehicles may contain engine valve spring
CRS 512 Mar 16, 2021
356000 EQUIPMENT ADAPTIVE/MOBILITY
Cummins has launched a customer satisfaction campaign for certain Cummins B6.7 diesel engines produced between August 26, 2020 and October 5, 2020, that may have been installed. Some of the affected vehicles may contain engine valve spring
CSR 510 Mar 12, 2021
061200 ENGINE AND ENGINE COOLING:ENGINE:DIESEL
Cummins Inc. has decided that a defect that relates to motor vehicle safety exists in certain B6.7 diesel engines manufactured between December 16, 2015, and March 24, 2020, and equipped with fuel module option FS90301 or FS90453. Cummins
CSR 510 Mar 12, 2021
080000 FUEL SYSTEM, DIESEL
Cummins Inc. has decided that a defect that relates to motor vehicle safety exists in certain B6.7 diesel engines manufactured between December 16, 2015, and March 24, 2020, and equipped with fuel module option FS90301 or FS90453. Cummins
CSR 511 Mar 12, 2021
061200 ENGINE AND ENGINE COOLING:ENGINE:DIESEL
Certain B6.7 diesel engines manufactured between December 16, 2015 and March 24, 2020 and equipped with fuel module option FS90301 or FS90453 were either delivered with a heater plug in place of the fuel heater, or your vehicle is subject t
CSR 511 Mar 12, 2021
080000 FUEL SYSTEM, DIESEL
Certain B6.7 diesel engines manufactured between December 16, 2015 and March 24, 2020 and equipped with fuel module option FS90301 or FS90453 were either delivered with a heater plug in place of the fuel heater, or your vehicle is subject t
CSR 509 Mar 5, 2021
103000 POWER TRAIN:AUTOMATIC TRANSMISSION
Ford Motor Company has decided that a defect which relates to motor vehicle safety exists in certain 2021 model year Econoline Ford E-350 and E-450 equipped with a 7.3L engine and a factory engine cover built between May 11, 2019 and Novemb
CSR 509 Mar 5, 2021
060000 ENGINE (PWS)
Ford Motor Company has decided that a defect which relates to motor vehicle safety exists in certain 2021 model year Econoline Ford E-350 and E-450 equipped with a 7.3L engine and a factory engine cover built between May 11, 2019 and Novemb
CSR 508 Feb 24, 2021
200000 WHEELS
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division and wholly-owned subsidiary, Western Star Truck Sales Inc., has decided that a defect which relates to motor vehicle safety exists on specific model year
CSR 506 Feb 23, 2021
110000 ELECTRICAL SYSTEM
Altec has been notified of a recall campaign by Daimler Trucks North America, LLC (DTNA). DTNA, on behalf of its Freightliner Trucks Division, has decided that a defect that relates to motor vehicle safety exists on specific model year 201
SIL 764 Jan 15, 2021
160000 STRUCTURE
Altec has discovered that the protective fabric hose sock in the upper boom hose carrier on the affected units can become unsecured and slip out of place. This can expose the fiber optic lines to damage, resulting in intermittent operation
SIL 764 Jan 15, 2021
350000 EQUIPMENT
Altec has discovered that the protective fabric hose sock in the upper boom hose carrier on the affected units can become unsecured and slip out of place. This can expose the fiber optic lines to damage, resulting in intermittent operation

Showing 100 of 106 bulletins.

ALTEC AERIAL DEVICE - All Years Overview

Complete safety history for the ALTEC AERIAL DEVICE across all model years (1995, 2026).

397 Total Recalls
1 Total Complaints
0 Investigations
0 Reported Crashes
0 Reported Fires
0 Reported Deaths

ALTEC AERIAL DEVICE - Year by Year

Compare recalls and complaints across model years. Click any year to see full details.

Year Recalls Complaints
2026 2 0 View
2025 7 0 View
2024 10 0 View
2023 13 1 View
2022 12 0 View
2021 22 0 View
2020 (current) 25 0
2019 29 0 View
2018 36 0 View
2017 38 0 View
2016 26 0 View
2015 20 0 View
2014 19 0 View
2013 16 0 View
2012 16 0 View
2011 12 0 View
2010 9 0 View
2009 10 0 View
2008 9 0 View
2007 8 0 View
2006 8 0 View
2005 9 0 View
2004 8 0 View
2003 5 0 View
2002 4 0 View
2001 4 0 View
2000 4 0 View
1999 4 0 View
1998 4 0 View
1997 4 0 View
1996 2 0 View
1995 2 0 View

Other ALTEC Models

Model Recalls Complaints
4300 0 0 View
470 KNUCKLE BOOM CRANE 0 0 View
4700 0 0 View
4900 0 0 View
7300 0 0 View
7400 0 0 View
A-CLASS 0 0 View
AA 0 0 View