Oceanic and AERIS Digital Dive Computers
CPSC Recall #07-117 — February 27, 2007
Recall Summary
| Recall Number | 07-117 |
| Recall Date | February 27, 2007 |
| Remedy Type | Replace |
| Units Affected | About 2,800 |
| Manufacturer | Pelagic Pressure Systems, of San Leandro, Calif. |
| Manufactured In | United States |
Where It Was Sold
| Authorized Oceanic dealers sold ATOM 2.0 dive computers nationwide from August 2006 through February 2007. Authorized AERIS dealers sold EPIC dive computers nationwide from October 2006 through February 2007. Both computers sold for between $670 and $950. |
Product
Oceanic and AERIS Digital Dive Computers
Description
WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Pelagic Pressure Systems, of San Leandro, Calif., is voluntarily recalling about 2,800 Oceanic and AERIS Digital Dive Computers. When performing a switch from one gas to another during a dive, the dive computer's display will lock up and not return to the main dive screen that displays dive times. This can cause divers to enter decompression unknowingly or the diver could ascend prematurely, resulting in decompression sickness.Name of product: Oceanic and AERIS Digital Dive ComputersUnits: About 2,800Manufacturer: Pelagic Pressure Systems, of San Leandro, Calif.Hazard: When performing a switch from one gas to another during a dive, the dive computer's display will lock up and not return to the main dive screen that displays dive times. This can cause divers to enter decompression unknowingly or the diver could ascend prematurely, resulting in decompression sickness.Incidents/Injuries: Pelagic has received a report of two dive computers malfunctioning. No injuries have been reported.Description and Models: The recall involves Oceanic-brand ATOM 2.0 dive computers with serial numbers 1 through 2,079 (Revisions 2E, 3A, and 3B) and AERIS-brand EPIC dive computers with serial numbers 1 through 712 (Revision 1A), which can be accessed and viewed on the computer's display. Also, the serial number and date of manufacture are printed on the bottom of the unit (Oceanic ATOM 2.0 from August 23 to November 23, 2006, and AERIS EPIC from October 18 to November 14, 2006). This recall does not include any other Oceanic or AERIS brand dive computers.Sold at: Authorized Oceanic dealers sold ATOM 2.0 dive computers nationwide from August 2006 through February 2007. Authorized AERIS dealers sold EPIC dive computers nationwide from October 2006 through February 2007. Both computers sold for between $670 and $950.Manufactured in: United StatesRemedy: Consumers should stop using the recalled dive computers and take them to an authorized Oceanic or AERIS dealer to get a free software upgrade.Consumer Contact: Contact Pelagic toll-free at (888) 854-4960 between 8 a.m. and 5 p.m. PT Monday through Friday, send an email to [email protected], or write to: Pelagic Pressure Systems, 2002 Davis Street, San Leandro, CA 94577. Information is also posted on the Oceanic and AERIS Web sites (www.OceanicWorldwide.com and www.diveaeris.com).
Hazard
When performing a switch from one gas to another during a dive, the dive computer's display will lock up and not return to the main dive screen that displays dive times. This can cause divers to enter decompression unknowingly or the diver could ascend prematurely, resulting in decompression sickness.
Incidents & Injuries
Pelagic has received a report of two dive computers malfunctioning. No injuries have been reported.
Remedy Instructions
Consumers should stop using the recalled dive computers and take them to an authorized Oceanic or AERIS dealer to get a free software upgrade.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Replace) at no cost to you.
Yes. If you were injured by a defective consumer product — whether recalled or not — you may have grounds for a product liability claim against the manufacturer and potentially the retailer. A recall notice can serve as evidence that the manufacturer was aware of the defect. Injuries that may support a claim include burns, lacerations, fractures, electric shock, choking incidents, and chemical exposure. Most product liability attorneys work on a contingency fee basis, meaning you pay nothing unless you win. Consult an attorney promptly, as statutes of limitation vary by state.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.