Shindaiwa Backpack Blowers
CPSC Recall #08-271 — May 14, 2008
Recall Summary
| Recall Number | 08-271 |
| Recall Date | May 14, 2008 |
| Remedy Type | Replace |
| Units Affected | About 23,000 (This recall was first announced in Aug. 2007) |
| Manufacturer | Shindaiwa Kogyo Co. Ltd, of Hiroshima, Japan |
| Manufactured In | Japan |
Where It Was Sold
| Shindaiwa dealers nationwide from September 2005 through January 2007 for about $600. |
Product
Shindaiwa Backpack Blowers
Description
This recall involves Shindaiwa Models EB8510 and EB8510RT. All models up to serial # 7014728 are included. The backpack blowers weigh approximately 24 pounds and include Serial Numbers through February 2007 production (S/N 702XXXX) which are located on the side label. These machines are black and blue with a red and black label that reads, "EB8510, Shindaiwa."
Hazard
The blower's impeller (fan) can separate from the base and break apart, causing plastic pieces to be blown out of the machine, and pose a laceration and impact hazard to consumers. The flying pieces also can cause property damage and injury to bystanders. Note: These backpack blowers were previously recalled due to a fire hazard.
Incidents & Injuries
Shindaiwa is aware of 13 incidents involving broken impellers. One incident involved a minor head injury and minor property damage to a nearby automobile.
Remedy Instructions
Consumers should stop using the backpack blowers immediately and contact Shindaiwa for the closest dealer location to schedule a free inspection and impeller replacement. Consumers who have registered their equipment should have already received correspondence from Shindaiwa about this recall.
What Should You Do?
Stop using this product immediately. Contact the manufacturer for a Replace at no charge. If you experienced an injury, report it at SaferProducts.gov.
Frequently Asked Questions
Follow the consumer action instructions in the recall notice above. Most recalls require you to stop using the product and contact the manufacturer directly — either by calling the toll-free number listed in the official CPSC notice or by visiting the manufacturer's website. You generally do not need a receipt or original packaging to claim a remedy. The manufacturer is legally required to provide the remedy (Replace) at no cost to you.
If the product caused a fire or burn injury, document the incident with photos and preserve the product if it is safe to do so. Report the incident to the CPSC at SaferProducts.gov and to your local fire department. Contact the manufacturer to inform them of the incident — they are required to track and report injuries to CPSC. You may also want to consult a personal injury attorney, as fire and burn injuries caused by defective products can be grounds for a product liability claim against the manufacturer.
In most cases, no. CPSC-coordinated recall remedies are designed to be accessible without proof of purchase. Manufacturers typically ask consumers to self-certify ownership and may ask for photos of the product or its serial number. Some manufacturers request that you mail in a portion of the product (such as a cut cord or removed component) as proof of disposal. Check the specific remedy instructions for this recall for exact requirements. If you registered your product at the time of purchase, the process is usually even simpler.
If the original manufacturer has gone out of business, the recall remedy may no longer be available through them. In this case, contact CPSC directly at 1-800-638-2772 or cpsc.gov for guidance. If the brand was acquired by another company, the acquiring company may have assumed recall obligations. In some cases where a remedy is unavailable, CPSC advises consumers to safely dispose of the product. If you were injured by the product of a defunct company, consult a product liability attorney — parent companies, distributors, and retailers may still bear liability in some circumstances.