PIPER PA-22-160
Bay Minette, AL — August 13, 2012
Event Information
| Date | August 13, 2012 |
| Event Type | ACC |
| NTSB Number | ERA12LA505 |
| Event ID | 20120814X23425 |
| Location | Bay Minette, AL |
| Country | USA |
| Coordinates | 30.87028, -87.81917 |
| Airport | Bay Minette |
| Highest Injury | NONE |
Aircraft
| Make | PIPER |
| Model | PA-22-160 |
| Category | AIR |
| FAR Part | 091 |
| Aircraft Damage | SUBS |
Conditions
| Light Condition | NITE |
| Weather | VMC |
Injuries
| Fatal | 0 |
| Serious | 0 |
| Minor | 0 |
| None | 2 |
| Total Injured | 0 |
Event Location
Probable Cause
The separation of the tailwheel linkage for reasons that could not be determined because the linkage was not located, which resulted in a loss of directional control during landing.
Full Narrative
On August 12, 2012, about 2045 central daylight time, a Piper PA-22-160, N9216D, operated by a private individual, was substantially damaged while landing at the Bay Minette Municipal Airport, Bay Minette (1R8), Alabama. The flight instructor and student pilot were not injured. Visual meteorological conditions prevailed and no flight plan had been filed for the instructional flight that was conducted under the provisions of 14 Code of Federal Regulations Part 91.
According to the flight instructor, the student pilot performed seven uneventful full-stop landings; however, during the takeoff that preceded the accident, he felt "something" abnormal from the tailwheel. During the subsequent landing, the airplane began to drift to the left, and could not be controlled with the appropriate brake and rudder inputs. The airplane departed the left side of the runway and the empennage struck a precision approach path indicator light. The elevator, rudder, and right stabilizer sustained substantial damage.
According to a Federal Aviation Administration inspector, postaccident examination of the airplane revealed that the linkage that attached the tailwheel to the rudder was not attached and could not be found.
According to maintenance records, at the time of the accident, the airplane had been operated for about 3,110 total hours and 3 hours since its most recent annual inspection, which was performed about 3 weeks prior to the accident. In addition, the airplane was manufactured in 1958, converted from a tricycle to tailwheel configuration in 1986, and had undergone a complete restoration during the previous 2 years.
About This NTSB Record
This aviation event was investigated by the National Transportation Safety Board (NTSB). NTSB investigates all U.S. civil aviation accidents to determine probable cause and issue safety recommendations to prevent future accidents.